Ring Modulator, 142, Freq Frequency #, Mod Modulator

LowGain (Low Gain)

Specifies the low frequency gain (amount of boost or cut). Positive (+) settings will emphasize (boost) the low frequency range.

Hi Gain (High Gain)

Specifies the high frequency gain (amount of boost or cut). Positive (+) settings will emphasize (boost) the high frequency range.

Specifies the stereo location of the output sound. L64 is far left, 0 is center, and 63R is far right.

Level (Output Level)

Specifies the output volume.

44: RING MODULATOR

Ring Modulator is an effect which applies amplitude modulation (AM) to the input signal, producing bell-like sounds.

You can also change the modulation frequency according to the volume of the sound input to the effects device.

L in Ring Mod 2-Band EQ L out

R in Ring Mod 2-Band EQ R out

Sets the frequency at which modulation will be applied.

Selects the input of the direct sound for the envelope controlling the modulation.

When set to SRC, the frequency is modulated according to the envelope of the sound input to the multi-effects.

Determines whether the input sound used as the modulator is output (ON) or not (OFF).

Sens (Sensitivity) #

Sets the amount of frequency modulation applied.

Determines whether the frequency modulation moves towards higher frequencies (UP) or lower frequencies (DOWN).

LowGain (Low Gain)

Adjust the low frequency gain (amount of boost or cut). Positive (+) settings will emphasize (boost) the low frequency range.

Hi Gain (High Gain)

Adjust the high frequency gain (amount of boost or cut). Positive (+) settings will emphasize (boost) the high frequency range.

Sets the volume balance between the direct sound and the effect sound.

With a setting of D100:0W only the direct sound will be output, and with a setting of D0:100W the effect sound will be output.

Level (Output Level)

Adjust the output level.