Chapter 10. Memory Settings (Utility Mode)

Copying a Patch

To copy the settings of a Patch, press [UTILITY] in Patch mode, then perform Copy operation.

Patch Tone Copy

Tone settings of a Patch will be copied to the Tone you specify of the current Patch.

 

 

 

 

 

 

 

 

 

 

 

 

 

Copy source Patch

 

 

Copy source Patch name

 

(group, number)

 

 

Copy destination Tone

 

 

 

 

 

 

 

 

 

 

 

 

 

Copy source Tone

To specify the currently selected Patch as the copy source, set Source to TEMP.

When the Copy operation is executed, an * symbol will be displayed in front of the copy-destination Tone.

For more detailed information and instructions for this procedure, refer to “Copying the Settings of Another

Tone (Tone Copy)” (p. 68).

Patch Effects Copy

You can copy the effect settings from any Performance, Patch or Rhythm Set into the currently selected Patch.

Copy source Copy source Performance/ Patch/Rhythm Set

(group, number, name)

Press to move to the next display, and then select the contents of the effect that you wish to copy.

Copy type

ALL: Multi-effects, Chorus, and Reverb settings

MFX: Multi-effects settings

CHORUS: Chorus settings

REVERB: Reverb settings

CHO&REV: Chorus and Reverb settings

For more detailed information and instructions for this procedure, refer to “Copying Another Effect Setting (Effects Copy)” (p. 161).

The Compare Function

For the Patch Tone Copy and Patch Effect Copy operations, you can use the Compare function.

The Compare function allows you to play the copy- source Patch. To play the Patch of the copy source, press [UNDO/COMPARE] to access the PATCH COMPARE page. The new Patch can also be selected from this page—however, it is not possible to select Patches from CD-A–H or XP-A–D. After selecting the desired Patch, return to the previous page by pressing [UNDO/ COMPARE] or [EXIT].

fig.10-06a.e

Copy source Patch (group, number, name)

The Compare function cannot be used with Patch Tone Copy if either TEMP, a CD-A–H or XP-A–D patch is selected as the copy-source Patch.

The Compare function cannot be used with Patch Effect Copy if PERFORM is selected as the copy source.

The Patch auditioned using the Compare function may sound slightly different than when it is played normally.

Patch Name Copy

You can copy the name of a Patch to the current Patch.

Copy source Patch (group, number, name)

Chapter 10

183

Page 183
Image 183
Roland XV-88 owner manual Copying a Patch, Patch Tone Copy, Patch Effects Copy, Patch Name Copy, 183