Roland XV-88 owner manual Modulation Delay, 128, Fbk Feedback Level

Chapter 7. Adding Effects

18: MODULATION DELAY

This effect adds modulation to the delayed sound, producing

an effect similar to a flanger.

When Feedback Mode is NORMAL:

	Balance D	2-Band
L in			L out
		EQ
Delay	Modulation	Balance W
Feedback
Feedback
Delay	Modulation	Balance W
R in		2-Band	R out
		EQ
	Balance D
When Feedback Mode is CROSS:
	Balance D	2-Band
L in			L out
		EQ
Delay	Modulation	Balance W
Feedback
Feedback
Delay	Modulation	Balance W
R in		2-Band	R out
	Balance D	EQ

Delay L (Delay Time Left)

Adjust the time from the direct sound until when the left delay sound is heard.

Delay R (Delay Time Right)

Adjust the time from the direct sound until when the right delay sound is heard.

Fbk (Feedback Level)

Adjust the proportion (%) of the delay sound that is fed back into the effect. Negative (-) settings will invert the phase.

Mode (Feedback Mode)

Select the way in which delay sound is fed back into the effect.

NORMAL: The left delay sound will be fed back into the left delay, and the right delay sound into the right delay. CROSS: The left delay sound will be fed back into the right delay, and the right delay sound into the left delay.

Rate #

Adjust the speed of the modulation.

Depth

Adjust the depth of the modulation.

Phase

Adjust the spatial spread of the sound.

HF Damp

Adjust the frequency above which sound fed back to the effect will be cut. If you do not want to cut the high frequencies of the feedback, set this parameter to BYPASS.

LowGain (Low Gain)

Adjust the gain of the low frequency range.

Hi Gain (High Gain)

Adjust the gain of the high frequency range.

Balance (Effect Balance) #

Adjust the volume balance between the direct sound and the modulation delay sound. With a setting of D100:0W only the direct sound will be output, and with a setting of D0:100W only the modulation delay sound will be output.

Level (Output Level)

Adjust the output level.

128