Roland XV-88 Making Multi-Effects Settings, Setting Procedure, Functions of Parameters, MFX Type

Chapter 7. Adding Effects

5.Either rotate the VALUE dial or press [INC/+]/[DEC/-] to set the value.

6.Press [EXIT] to return to the PERFORM PLAY page. An asterisk * appears at the left of the Performance group on the display. This shows Performance settings have been modified.

If you select another Performance in the group with an asterisk *, the modified Performance settings will be lost. To keep these modified settings, perform the save operation (p. 164).

Making Multi-Effects Settings

You can make the settings for Multi-Effects used by Patches/

Rhythm Sets/Performances.

Setting Procedure

1.After confirming that you are in Patch/Rhythm Set/ Performance mode, select the desired Patch/Rhythm Set/Performance (p. 29, p. 35, p. 39).

2.Press [EDIT], getting the indicator to light, and then press the [EFFECTS] function button.

3.Press or to display the desired Edit page.

4.Press or to move the cursor to the parameter you’re going to modify.

5.Use the VALUE dial, [INC/+]/[DEC/-], or the numeric keys to change the parameter value.

6.When you finish making settings, press [EXIT] to return to the previous PLAY page.

An asterisk * will be displayed at the left of the Patch/ Rhythm Set/Performance group. This indicates that the Patch/Rhythm Set/Performance settings have been modified.

If you select another Patch/Rhythm Set/Performance in the group with an asterisk *, the modified Patch/ Rhythm Set/Performance settings will be lost. To keep these modified settings, perform the save operation (p. 164).

Functions of Parameters

The functions of Multi-effects parameters are explained according to the display arrangement.

MFX TYPE

Type (Multi-Effects Type)

Use this parameter to select from among the 63 available Multi-effects. For details on Multi-effects parameters, refer to “Multi-Effects Types” (p. 117).

Source (Multi-Effects Source)

Selects the Multi-effects parameter settings that will be used by the Performance. If you wish to use the Performance settings, select PERFORM. If you wish to use the settings of the Patch/Rhythm Set assigned to one of the Parts, select the Part number.

If you have selected the Part number here, the Part number will be displayed in the upper left of the MFX parameter setting display of Performances.

This parameter is not available when a Patch or Rhythm Set is being selected.

When Patch or Rhythm Set Settings Are Selected

When the Patch or Rhythm Set’s Multi-effects settings are selected, those settings are shown in each of the Performance’s MFX settings pages, and the settings can be then be changed as well. Changes to Patch or Rhythm Set Multi-effects parameter settings are lost when another Patch or Rhythm Set is selected. To keep the modified settings, save the Patch/Rhythm Set settings (p. 164).

114