Roland XV-88 owner manual FLANGER→ Delay, CHORUS→ Flanger, 138, Flg Bal Flanger Balance #

Chapter 7. Adding Effects

36: FLANGER→ DELAY

This effect connects a flanger and a delay in series.

Balance D
L in		L out
Feedback		Balance D
Flanger	Balance W	Balance W
		Delay
	Balance W	Balance W
		Feedback
R in		R out
Balance D		Balance D

Flg Dly (Flanger Pre Delay Time)

Adjust the time delay from when the direct sound begins until the flanger sound is heard.

FlgRate (Flanger Rate)

Adjust the modulation speed of the flanger effect.

Flg Dpt (Flanger Depth)

Adjust the modulation depth of the flanger effect.

Flg Fbk (Flanger Feedback Level)

Adjust the proportion (%) of the flanger sound that is fed back into the effect. Negative (-) settings will invert the phase.

Flg Bal (Flanger Balance) #

Adjust the volume balance between the direct sound and the flanger sound. With a setting of “D100:0W,” only the direct sound will be output. With a setting of “D0:100W,” only the flanger sound will be output.

DlyTime (Delay Time)

Adjust the time delay from when the direct sound begins until the delay sound is heard.

Dly Fbk (Delay Feedback Level)

Adjust the proportion (%) of the delay sound that is fed back into the delay input. Negative (-) settings will invert the phase.

HF Damp

Adjust the frequency above which delayed sound fed back to the delay input will be cut. If you do not want to cut the high frequencies of the delay feedback, set this parameter to

BYPASS.

Delay Balance #

Adjust the volume balance between the flanger sound that is sent through the delay and the flanger sound that is not sent through the delay. With a setting of “D100:0W,” only the flanger sound will be output. With a setting of “D0:100W,” only the flanger sound that is sent through the delay will be output.

Level (Output Level)

Adjust the output level.

37: CHORUS→ FLANGER

This effect connects a chorus and a flanger in series.

Balance D	Balance D
L in	L out
Balance W	Feedback
	Balance W
Chorus	Flanger
Balance W	Balance W
R in	R out
Balance D	Balance D

Cho Dly (Chorus Pre Delay Time)

Adjust the time delay from when the direct sound begins until the chorus sound is heard.

ChoRate (Chorus Rate)

Adjust the modulation speed of the chorus effect.

Cho Dpt (Chorus Depth)

Adjust the modulation depth of the chorus effect.

Cho Bal (Chorus Balance) #

Adjust the volume balance between the direct sound and the chorus sound. With a setting of “D100:0W,” only the direct sound will be output. With a setting of “D0:100W,” only the chorus sound will be output.

Flg Dly (Flanger Pre Delay Time)

Adjust the time delay from when the direct sound begins until the flanger sound is heard.

FlgRate (Flanger Rate)

Adjust the modulation speed of the flanger effect.

Flg Dpt (Flanger Depth)

Adjust the modulation depth of the flanger effect.

Flg Fbk (Flanger Feedback Level)

Adjust the proportion (%) of the flanger sound that is fed back into the effect. Negative (-) settings will invert the phase.

Flanger Balance #

Adjust the volume balance between the chorus sound and the chorus sound that is passed through the flanger. With a setting of “D100:0W,” only the chorus sound will be output. With a setting of “D0:100W,” only the chorus sound that passes through the flanger will be output.

Level (Output Level)

Adjust the output level.

138