Roland XV-88 owner manual Storing Sound Data in User Memory Write, Saving a Performance, 180

Chapter 10. Memory Settings (Utility Mode)

3.Use or to select the desired function (the function name will blink), and press [ENTER].

The display for the desired function will appear.

•You can also access the desired function page by using the numeric keys or function buttons to specify the number of the function.

•If you selected the UTIL 2 group function “1. CARD,” the CARD page will appear. Here you can once again select the desired function.

4.When parameters in the different function page are to be set, you can use the VALUE dial, [INC/+]/[DEC/-], or the numeric keys to make the settings.

To cancel the operation, press [EXIT].

5.Press [ENTER] to execute the function.

When the operation is completed, the display will briefly indicate “COMPLETED.”

When certain functions are executed, you are then returned to the original mode page.

6.To return to the UTIL 1 or UTIL 2 page, press [EXIT]. To return to the display of the previous mode, press [UTILITY] to make the indicator go dark.

Storing Sound Data in User Memory (WRITE)

If you turn the power off or select another Performance, Patch, or Rhythm Set after you have modified a Performance, Patch, or Rhythm Set, the changes you have made will be lost. If you wish to keep the data, store it into internal memory (user memory).

Internal Write Protect

The Internal Write Protect setting is provided to help prevent the accidental overwriting of data in the user memory. When saving new data to the user memory, you must turn off Internal Write Protect. If you attempt to save data when it is on, the following display will appear.

fig.10-03

Change the displayed ON to OFF and press [ENTER] to turn Internal Write Protect off. Press [ENTER] once again, and the data will be written into the user memory. Once you disable Internal Write Protect, it will remain disabled until the XV-88’s power is turned off. When the power is turned on once again, it will be reset to ON.

Saving a Performance

The settings of the current Performance will be written into user memory. Press [UTILITY] in Performance mode, and perform Write operation.

Writing destination Performance (group, number, name)

By holding down [SHIFT] and pressing [UTILITY], you can move directly to the PERFORM WRITE page.

For more detailed information and instructions for this procedure, refer to “Saving to Internal Memory” (p. 164).

180