Roland XV-88 owner manual Quick Reference of Procedures, Performance Mode, 220

Quick Reference of Procedures

The XV-88 has a large number of functions. This section gives the procedures for using some of the frequently-used functions. For functions that are used simply by setting the applicable parameter, only the “Parameter name (mode/display group/display)” is listed.

* “[A] + [B]” indicates “press [B] while holding down [A]”; “[A] → [B]” means “press [B] after first pressing (and releasing) [A].”

Performance Mode

Selecting the Performance	Press [PERFORM].
Mode PLAY Page
Selecting a Performance	Use the VALUE dial, [INC/+], [DEC/-], or numeric keys to
	select.
Selecting a Performance	USER: Press [USER].
Group	CD-A–H: Press [CARD] →	[A]–[H].
	PR-A, B: Press [PRESET] →	[A], [B].
Selecting Performances	1. Press [SHIFT] + numeric key [0] (turn on the Digit Hold
Using the Digit Hold	function).
Function	2. Use the numeric keys to specify the number of the one’s
	place.

*To turn off the Digit Hold function, press [SHIFT] + [0] once again.

Changing the Patch/	1.	Press [PERFORM] + [PATCH].
Rhythm Set Assigned to	2.	Use	/	to select a Part.
a Part

3.Use the VALUE dial, [INC/+], [DEC/-], or the numeric keys to select a Patch or Rhythm Set.

Modifying Performance	1.	Turn on the [EDIT] indicator.
Settings	2.	Use the function buttons to select the display group.
(basic procedure)
	3.	Use		/		to select the desired setting page.
	4.	Turn off the [EDIT] indicator.
	5.	Use [ZONE/PART SELECT] (function button) to select
		the Part.
	6.	Use			to select a Parameter.
			/
	7.	Use the VALUE dial, [INC/+], [DEC/-], or the numeric
		keys to modify the value.
	*	If you wish to move to a different display group, turn on the
		[EDIT] indicator.
Adjusting the Volume of	Level parameter (PERFORM/PART/SETTING)
Each Part
Adjusting the Pan of	Pan parameter (PERFORM/PART/SETTING)
Each Part

220