VELO CRV (Velocity Curve)

Velocity Curve

Velocity Curve selects for each MIDI channel one of the four following Velocity Curve types that best matches the touch of the connected MIDI keyboard. Set this to OFF if you are using the MIDI keyboard’s own velocity curve.

 

 

 

 

 

 

 

 

1

 

2

3

4

 

Phase Lock (Phase Lock Switch)

Set Phase Lock to ON when you want to suppress discrepancies in timing of Parts played on the same MIDI channel, or to OFF when you want to leave the expression timing unchanged.

When the Phase Lock parameter is set to ON, Parts on the same MIDI channel are put in a condition in which their timing is matched, enabling them to be played at the same time. Accordingly, a certain amount of time may elapse between reception of the Note messages and playing of the sounds. Turn this setting to ON only as needed.

Making Settings for Each Part (PART)

Here you can select the Patch/Rhythm Set assigned to each Part, and set the volume, pan, pitch, and polyphony of each Part.

PATCH

Type (Part Type)

Sets the assignment of a Patch (PAT) or Rhythm Set (RHY) to each of the Parts.

Group (Patch/Rhythm Set Group)

Selects the group to which the desired Patch or Rhythm Set belongs.

USER: User

CD-A–H: Memory card A–H

PR-A–F, GM: Preset A–F, GM

Chapter 3. Creating Performances

XP-A–D: Wave Expansion Board A–D

Patches/Rhythm Sets of CD-A–H cannot be accessed unless a memory card (SmartMedia) is inserted into the MEMORY CARD slot.

XP-A, B Patches/Rhythm Sets can be selected only if a Wave Expansion Board (SR-JV80 Series) is installed in the corresponding slot.

XP-C, D Patches/Rhythm Sets can be selected only if a Wave Expansion Board (SRX Series) is installed in the corresponding slot.

Number (Patch/Rhythm Set Number)

Selects the desired Patch or Rhythm Set by its number. The name of the selected Patch/Rhythm Set appears in parentheses.

SETTING

Level (Part Level)

Adjusts the volume of an individual Part. This setting’s main purpose is to adjust the volume balance between Parts.

Pan (Part Pan)

Adjusts the pan of each Part. L64 is far left, 0 is center, and 63R is far right.

When the Pan is set for each Patch or Rhythm Set, this Pan setting moves the position only in reference to those settings values made in the respective Patch or Rhythm Set.

Voice Reserve

This setting specifies the number of voices that will be reserved for each Part when more than 128 voices are played simultaneously.

It is not possible for the settings of all Parts to total an amount greater than 64. The remaining number of available voices will be displayed at (rest= ). Pay attention to this readout as you make set the Voice Reserve parameter.

Chapter 3

53

Page 53
Image 53
Roland XV-88 owner manual Making Settings for Each Part Part, Velo CRV Velocity Curve, Patch