Midi Implementation, 271 | Roland XV-88 instruction

❍Volume (Controller number 7)

Status	2nd byte	3rd byte
BnH	07H	vvH
n = MIDI channel number:0H - FH (ch.1 - 16)
vv = Volume:	00H - 7FH (0 - 127)

*Not received in Performance mode when the Vol parameter (PERFORM/MIDI/ RxSWITCH) is OFF.

*In Performance mode the Level parameter (PERFORM/PART/SETTING) will change.

❍Balance (Controller number 8)

Status	2nd byte	3rd byte
BnH	08H	vvH
n = MIDI channel number:		0H - FH (ch.1 - 16)
vv = Balance:		00H - 7FH (0 - 127)

❍Panpot (Controller number 10)

Status	2nd byte	3rd byte
BnH	0AH	vvH
n = MIDI channel number:		0H - FH (ch.1 - 16)
vv = Panpot:		00H - 40H - 7FH (Left - Center - Right),

*Not received in Performance mode when the Pan parameter (PERFORM/MIDI/ RxSWITCH) is OFF.

*In Performance mode the pan parameter (PERFORM/PART/SETTING) will change.

❍Expression (Controller number 11)

Status	2nd byte	3rd byte
BnH	0BH	vvH
n = MIDI channel number:		0H - FH (ch.1 - 16)
vv = Expression:		00H - 7FH (0 - 127)

*Not received when Expression parameter (PATCH/CONTROL/CTRL Rx MIDI or RHYTHM/CONTROL/Rx MIDI) is OFF.

*Not received in Performance mode when Exp parameter (PERFORM/MIDI/ RxSWITCH) is OFF.

❍Hold 1 (Controller number 64)

Status	2nd byte	3rd byte
BnH	40H	vvH
n = MIDI channel number:		0H - FH (ch.1 - 16)
vv = Control value:		00H - 7FH (0 - 127) 0-63 = OFF, 64-127 = ON

*Not received when Hold-1 parameter (PATCH/CONTROL/CTRL Rx MIDI or RHYTHM/CONTROL/Rx MIDI) is OFF.

*Not received in Performance mode when Hld parameter (PERFORM/MIDI/ RxSWITCH) is OFF.

❍Portamento (Controller number 65)

Status	2nd byte	3rd byte
BnH	41H	vvH
n = MIDI channel number:		0H - FH (ch.1 - 16)
vv = Control value:		00H - 7FH (0 - 127) 0 - 63 = OFF, 64 - 127 = ON

*In Performance mode the Portamento Sw parameter (PERFORM/PART/MONO/POL) will change.

❍Sostenuto (Controller number 66)

Status	2nd byte	3rd byte
BnH	42H	vvH
n = MIDI channel number:		0H - FH (ch.1 - 16)
vv = Control value:		00H - 7FH (0 - 127) 0 - 63 = OFF, 64 - 127 = ON

❍Soft (Controller number 67)

Status	2nd byte	3rd byte
BnH	43H	vvH
n = MIDI channel number:		0H - FH (ch.1 - 16)
vv = Control value:		00H - 7FH (0 - 127) 0 - 63 = OFF, 64 - 127 = ON

MIDI Implementation

❍Legato Foot Switch (Controller number 68)

Status	2nd byte	3rd byte
BnH	44H	vvH
n = MIDI channel number:		0H - FH (ch.1 - 16)
vv = Control value:		00H - 7FH (0 - 127) 0 - 63 = OFF, 64 - 127 = ON

*In Performance mode the Legato parameter (PERFORM/PART/MONO/POL) will change.

❍Hold-2 (Controller number 69)

Status	2nd byte	3rd byte
BnH	45H	vvH
n = MIDI channel number:		0H - FH (ch.1 - 16)
vv = Control value:		00H - 7FH (0 - 127)

*A hold movement isn't done.

❍Resonance (Controller number 71)

Status	2nd byte	3rd byte
BnH	47H	vvH
n = MIDI channel number:		0H	- FH (ch.1 - 16)
vv= Resonance value (relative change):		00H - 7FH (-64 - 0 - +63),

*In Performance mode the Res parameter (PERFORM/PART/MODIFY) will change.

❍Release Time (Controller number 72)

Status	2nd byte	3rd byte
BnH	48H	vvH
n = MIDI channel number:		0H	- FH (ch.1 - 16)
vv = Release Time value (relative change):		00H - 7FH (-64 - 0 - +63),

*In Performance mode the Rel parameter (PERFORM/PART/MODIFY) will change.

❍Attack time (Controller number 73)

Status	2nd byte	3rd byte
BnH	49H	vvH
n = MIDI channel number:		0H	- FH (ch.1 - 16)
vv = Attack time value (relative change):		00H - 7FH (-64 - 0 - +63),

*In Performance mode the Atk parameter (PERFORM/PART/MODIFY) will change.

❍Cutoff (Controller number 74)

Status	2nd byte	3rd byte
BnH	4AH	vvH
n = MIDI channel number:		0H	- FH (ch.1 - 16)
vv = Cutoff value (relative change):		00H - 7FH (-64 - 0 - +63)

*In Performance mode the Cut parameter (PERFORM/PART/MODIFY) will change.

❍Decay Time (Controller number 75)

Status	2nd byte	3rd byte
BnH	4BH	vvH
n = MIDI channel number:		0H	- FH (ch.1 - 16)
vv = Decay Time value (relative change):		00H - 7FH (-64 - 0 - +63)

*The decay time will change in GM mode.

❍Vibrato Rate (Controller number 76)

Status	2nd byte	3rd byte
BnH	4CH	vvH
n = MIDI channel number:		0H	- FH (ch.1 - 16)
vv = Vibrato Rate value (relative change):		00H - 7FH (-64 - 0 - +63)

*The vibrato rate will change in GM mode.

❍Vibrato Depth (Controller number 77)

	Status	2nd byte	3rd byte
	BnH	4DH	vvH
	n = MIDI channel number:			0H	- FH (ch.1 - 16)
	vv = Vibrato Depth Value (relative change):			00H - 7FH (-64 - 0 - +63)
	vv = Vibrato Depth Value (relative change):			00H - 7FH (-64 - 0 - +63)		Appendices
	* The vibrato depth will change in GM mode.					Appendices
	* The vibrato depth will change in GM mode.

271

Image 271

Roland XV-88 owner manual Midi Implementation, 271

Contents

Page Important Safety Instructions Page Using the Unit Safely Important Notes How to Use This Manual How to Use This Manual Contents Creating Performances Contents Adding Effects Using the XV-88 as a GM Sound Module GM Mode 192 Appendices 213 Main Features Front Panel Front and Rear Panel Front and Rear Panel Effects Section Numeric Keys Group SectionBank Section INC/+, DEC Rear Panel Individual 1-4 Jacks Wave Expansion Board Installation SlotOutput a MIX Jacks L MONO, R Output B Jacks L, R How the XV-88 Is Organized OverviewBasic Structure Tones Classification of XV-88 Sound TypesPatches Part Rhythm SetsParts Generator Keys are played Overview Setting the Midi Connection Zone and Part Overview Voice Reserve Number of VoicesCalculating the Number of Voices Being Used How a Patch Sounds Basic Operations on Switching ModesSystem Mode Utility Mode GM Mode Edit Indicator is Extinguished Performance Mode Edit Indicator is ExtinguishedOverview Patch Mode Edit Indicator is Extinguished Rhythm Set Mode Edit Indicator is Extinguished Moving Between Display Pages Overview When Edit Indicator is LitRemote Control of External Sequencers About the Cursor Buttons Numeric Keys Modifying a ValueValue Dial INC/+ and DEC Convenient Functions Using the Numeric KeysAvailable characters/symbols Assigning a Name Playing Playing in Patch ModeSelecting a Patch Express Patch Select Digit Hold Selecting Patches by Category Patch Finder Following categories can be selected Selecting Favorite Patches from Favorite List Preview Mode Preview Sound Mode Using Phrase Preview to Play PatchesMaking a Patch Sound Thick or Thin Turning a Tone On/Off Creating Smooth Pitch Changes Portamento Playing Single Notes Solo About the Midi Connection Settings Zone and Part Playing in Performance ModeUsing the Sliders to Modify the Sound in Realtime Changing the Volume of Each Tone Single Performance PR-A, B Preset A, BSelecting a Performance Layer Performance Playing Fatter and Richer Sounds by Combining Patches Layer Selecting a Part You Want to Play on the Keyboard Assigning a Different Patch to a Part Playing Muting a Specific Part Turning Receive Switch On/Off Selecting a Rhythm Set Playing in Rhythm Set ModeAdjusting the Volume Balance Between Parts PR-A-F Presets A-F Selecting Favorite Rhythm Sets from the Favorite List Playing Percussion Instruments Patch/Rhythm Set/GM ModePerformance Mode Playing Arpeggios Arpeggiator Playing a Keyboard Instrument Playing a GlissandoPlaying a Bass Part Playing a Guitar When Using a Hold Pedal Playing an Arpeggio Over a Preset Keyboard AreaHolding an Arpeggio Playing an Arpeggio from an External Midi Device Simulating a Rhythm GuitarCreating an Arpeggio Pattern Assign parameter SYSTEM/D BEAM/D Beam Control p Output parameter SYSTEM/D BEAM/D Beam Control p Transposing the Keyboard in Octave Units Octave Shift Convenient Functions for PerformanceEffective range of the D Beam Controller Transposing the Keyboard in Semitone Steps Transpose When Sounds from the XV-88 Do Not Stop PlayingIf Stuck Notes Occur Panic Creating Performances How to Make Performance SettingsHow a Performance Is Organized Copying the Settings of Another Part Part Copy Making Settings While Comparing Parts Palette Edit KEY Rang Key Range Settings Common to the Entire Performance CommonFunctions of Performance Parameters Perform Name Performance Name Midi Setting Effects for a Performance EffectsMaking Settings for Receiving Midi Midi RxSWITCH Receive Switch Patch Making Settings for Each Part PartSetting Velo CRV Velocity Curve Pitch Modify Creating Performances MONO/POL Mono/Poly Info Part Information Confirming Midi Information for Each Part InfoVo Voice Information How to Make the Zone Settings Zone Settings Functions of Zone Parameters Making Settings While Comparing Zones Palette EditSettings Common to the Entire Zone Common Key Mode Lower Key Range Lower Setting the Keyboard Range KEY RangeMaking Settings for Transmitting Midi Midi Tx Transmit Switch EXT P.C External Program Change Controlling External Sound Module EXT ControlEXT Ctrl External Control Octave Range Arpeggiator Settings ArpeggioArpeggio Style Arpeggio Style Shuffle Rate MotifBeat Pattern Accent Rate Beam Control Setting the D Beam Controller D Beam Info Zone Information Confirming the Settings for Each Zone InfoBeam Range Beam Sens How a Patch Is Organized Creating PatchesHow a Tone Is Organized Decide which Tones will sound p , p How to Make the Patch SettingsCheck the Structure setting p Four Tips for Editing Patches Making Settings While Comparing Tones Palette Edit Copying the Settings of Another Tone Tone Copy Patch Name Settings Common to the Entire Patch CommonFunctions of Patch Parameters Waveform Patch OCT&TUNE Patch Octave & Tune Creating Patches Patch LVL&PAN Patch level & PanPatch Common Patch Modify Patch Tempo TMT VEL Rang TMT Velocity Range TMT Velo Control TMT Velocity Control Creating Patches Struct Structure TMT KEY Rang TMT Key RangeType Structure Type Creating Patches Booster Booster Gain Setting Effects for a Patch EffectsWhat is a Booster? What is a Ring Modulator? Patch KEY Mode Patch Key Assign Mode Using Controllers to Change How Sounds Are Played ControlPatch Portamnt Patch Portamento Start Portamento Start Pitch Bender Receive Pitch Bend SwitchHold-1 Receive Hold 1 Switch Ctrl Rx Midi Control Receive Midi Matrix Ctrl SRC Matrix Control Source TMT CTRL&BENDER TMT Control & Bender Opening and Closing the Filter Changing the Volume, Pan, and PitchMatrix Control Dest Matrix Control Destination Changing the TVF Envelope Changing How the Effects Are AppliedApplying LFO to Modulate Sounds Changing the Pitch Envelope Wave Modifying Waveforms WaveFXM Frequency Cross Modulation Mode Tone Delay Mode Tone Delay LFO1/LFO2 Wave Modulating Sounds LFO How to Apply the LFO LFO1/LFO2 DelayLFO1/LFO2 Fade TVF TVF LFO Depth 1 LFO DepthLFO is gradually added after the key is released Pitch Pitch LFO Depth 1 PCH Envelope Pitch Envelope Modifying Pitch Pitch Sound with a Filter TVF Modifying the Brightness of aTVF Filter Resonance Cutoff Cutoff FrequencyKeyfollow Cutoff Frequency Keyfollow TVF Envelope TVF Velocity TVA Adjusting the Volume and Pan TVA PAN Modulate Bias TVA Envelope Creating Patches TVA Time ENV TVA Time Envelope Creating Rhythm Sets How to Make the Rhythm Set SettingsHow a Rhythm Set Is Organized Copying the Settings of Another Rhythm Tone Rhythm Tone Copy Making Settings While Comparing Waveforms Palette Edit Waveform to create a decay that is longer than the original Rhythm Common Rhythm Set Common Settings Common to the Entire Rhythm Set CommonFunctions of Rhythm Set Parameters Rhythm Name Rhythm Set Name Control Setting Effects for a Rhythm Set EffectsRx Midi Receive Midi Tone Name Rhythm Tone Name Modifying Waveform of a Rhythm Tone WaveWMT Wave Creating Rhythm Sets Velo Control Velocity Control WMT VEL Rang WMT Velocity RangeWMT PAN WMT Frequency Cross Modulation Modifying Pitch of a Rhythm Tone PitchCreating Rhythm Sets WMT Tune WMT Tune WMT FXM 101 Changing the Tone Filter of a Rhythm Tone TVF 102 Pan Rhythm Tone Pan Adjusting the Volume and Pan of a Rhythm Tone TVA103 Level Rhythm Tone Level Velocity Curve TVA Envelope Velocity Curve TVA Velocity104 Velocity Sens TVA Envelope Velocity Sensitivity Turning Effects On/Off Adding EffectsAbout the Onboard Effects Effect Types Basic Process of Making Effects Settings Applying Effects in Patch Mode or Rhythm Set Mode106 REV Adding Effects Audio Signal Flow107 Tone MFX 108 Selecting the Way the Direct Sound is OutputAbout the Output Jacks 109 Settings for Each Tone/ Rhythm ToneWhen Selecting a Tone When Selecting a Rhythm Tone Chorus Chorus Send Level 110Reverb Reverb Send Level 111 Applying Effects Performance Mode REV Main 112 113 MFX Type Making Multi-Effects SettingsSetting Procedure Functions of Parameters 115 What is the Multi-Effects Controller?MFX PRM MFX Parameter MFX Ctrl MFX Control 116 MFX OUT MFX Output 117 Multi-Effects Types 118 Adding Effects Selecting Multi-Effects by Category Overdrive Stereo EQ Stereo Equalizer119 Distortion Phaser120 Enhancer Spectrum121 Rotary Auto WAH122 Limiter Compressor123 Tremolo Chorus HEXA-CHORUS124 125 PhaseSPACE-D Stereo Chorus Step Flanger Stereo Flanger126 127 Stereo Delay 128 Modulation DelayFbk Feedback Level 129 Triple TAP Delay 130 Quadruple TAP Delay 22 2VOICE Pitch Shifter Time Control Delay131 Coarse Coarse Pitch #1 FBK Pitch Shifter Feedback Pitch Shifter132 Lvl Bal Level Balance Gated Reverb Reverb133 OVERDRIVE→ Flanger OVERDRIVE→ Chorus134 DISTORTION→ Flanger OVERDRIVE→ DelayDISTORTION→ Delay DISTORTION→ Chorus Enhancer Sens Enhancer Sensitivity # ENHANCER→ ChorusENHANCER→ Flanger 136 137 ENHANCER→ DelayCHORUS→ Delay Delay Balance # Flg Bal Flanger Balance # FLANGER→ DelayCHORUS→ Flanger 138 CHORUS/FLANGER CHORUS/DELAYFLANGER/DELAY Stereo Phaser 140 Keysync Flanger 141 Formant Filter Mod Modulator Ring Modulator142 Freq Frequency # 143 Multi TAP Delay 144 Reverse Delay 145 Shuffle Delay 146 Adding Effects 48 3D Delay Lofi Compress Pitch Shifter147 Speaker Simulator Lofi Noise148 149 Amp Type Amp Simulator Switch/TypeTone Attack Attack Time Stereo CompressorStereo Limiter 150 Slicer Gate151 60 3D Chorus Isolator152 153 61 3D Flanger 154 TremoloMod Wave Modulation Wave Auto PAN When Using 3D Effects155 Type Chorus Type Making Chorus SettingsCHO Type 156 157 CHO PRM CHO Parameter Adding Effects CHO OUT Chorus Output Making Reverb Settings158 Adding Effects REV PRM REV Parameter REV Type159 160 REV OUT REV Output 161 Copying Another Effect Setting Effects Copy About Memory Saving Sounds162 Rewritable Memory Temporary MemoryNon-Rewritable Memory Comparing with the Save Destination Patch Compare Function Saving to Internal Memory164 Registering Data Without Displaying the Favorite List 165 166 When Saving a PerformanceWhen Saving a Patch When Saving a Rhythm Set Saving to an External Midi Device 167 Saving a Group of Tones to a Memory Card Functions of System Parameters How to Make the System Function SettingsDisplay Screen Contrast and Clock Settings Setup System Setup Perform Midi Performance Midi Midi Settings Midi169 170 Patch MidiGM Midi Receive Midi Keyboard Settings ControlKeyboard and Controllers Transmit Midi 172 Hold PedalControl Pedal 1 C1-C4 Assign C1-C4 Slider Assign Patch Scale Adjusting Tuning TuneSYS Ctrl Assign 1, 2 System Control Assign 1 System Tune Just Temperament Tonic of C KEY Scale174 Equal Temperament Getting More Familiar with the XV-88 System Functions 175 176 Preview Velocity Phrase Preview Settings PreviewSystem Preview Preview KEY Info EXP Battery CheckTransmit P.C About Utility Mode Memory Settings Utility ModeBasic Procedure in Utility Mode Internal Write Protect Storing Sound Data in User Memory WriteSaving a Performance 180 Compare Function Saving a PatchSaving a Rhythm Set 181 Copying a Performance Copying Sound Generator Settings Copy Patch Name Copy Copying a PatchPatch Tone Copy Patch Effects Copy Rhythm Set Name Copy Copying a Rhythm SetRhythm Tone Copy Rhythm Set Effects Copy Transmitting Sound Settings Xfer Initializing Sound Generator Settings Init Block Source Block Transmitting Data to186 Type Data Type 187 188 Memory Card-Related Settings CardBefore Using a Memory Card Protecting the Internal Memory Protect Copying Files Between Memory Cards File Copy Formatting the Memory Card for the XV-88 FormatRenaming a File Rename Deleting Unwanted Files Delete Loading a File from Memory Card into the XV-88 Load Checking the Contents of a Memory Card InfoSaving Data to Memory Card Save 191 Recalling Factory Default Settings Factory Reset General MIDI/General Midi 2 System On Message Entering GM ModePlaying Back GM Scores 192 Using the XV-88 as a GM Sound Module GM Mode Modifying GM Mode Settings193 Output Making Effects Settings in GM Mode Effects194 GM Chorus GM Reverb Making Settings for Receiving195 196 Each Part Info Confirming Midi Information for197 Basic Procedure Convenient Functions in GM Mode GM UtilityInitializing GM Mode Init Transmitting GM Mode Settings Xfer 199 Techniques for Using PatchesReinforcing Filter Characteristics Using the Slider to Change the Pan in Realtime Syncing the LFO Cycle to System Tempo Changing the Tone Produced with the Modulation Lever200 Multi-effects Type Parameter synchronized To tempo Modifying Multi-Effects to Match the System’s TempoPlaying Phrase Loops in Sync with the System Tempo 201 202 Using the XV-88 to Play Live Playing an External Midi Sound Module from Using External Midi DevicesChanging Sounds with a Pedal Switch Patch/Rhythm Set Mode 204 Controlling an External Midi Sequencer from 205 GM ModeGenerator from an External Midi Device p Group Number Bank Select Selecting XV-88 Sounds from an External Midi DeviceSelecting Performances 206 Number Bank Select Realizing the Potential Selecting PatchesSelecting Rhythm Sets 207 Two Connection Methods Connecting to Your ComputerConnecting with Computer Connector Enjoying Desktop Music 209 Connecting with Midi Connectors USB 210 211 Turn on the Midi Thru Function of Your Sequencer Software 212 When the Computer Switch Is Set to Mac or PCWhen the Computer Switch Is Set to How Midi Messages Are Exchanged with a Computer 213 Appendices 214 TroubleshootingCannot Turn the Power On No Sound Specific Keyboard Area Does Not Sound Song Data Does Not Play Back CorrectlySpecific Part Does Not Sound No Sound from Connected Midi Device Effects Do Not Apply When You Play the Keyboard, Notes Do Not StopSound Is Distorted Pitch Is Incorrect 217 Cannot Use Memory CardsIs the memory card SmartMedia formatted? 218 Error Messages 219 Error Messages Performance Mode Quick Reference of Procedures220 Quick Reference of Procedures Patch Mode221 222 Rhythm Set Mode 223 Controller Settings 224 225 Saving and Loading Data 226 227 Controlling External Midi Devices 228 Controlling the XV-88 from an External Midi Device 229 Others Effects Group p Parameter ListPerformance Parameters Common Group p 231 Parameter List Midi Group pPart Group p Information Group p Zone Parameters 233 Patch ParametersParameter List Beam Group p Info Group p 234 Parameter List Effects Group p Wave Group p Parameter List Control Group p235 Pitch Group p Parameter List LFO Group p236 237 Rhythm Set ParametersParameter List TVF Group p TVA Group p 238 239 Parameter List Pitch Group pTVA Velocity 240 GM Mode Parameters Multi-Effects Parameters Tremolo Chorus p Stereo Delay pParameter List Limiter p HEXA-CHORUS p Parameter List Time Control Delay p Modulation Delay pTriple TAP Delay p Quadruple TAP Delay p CHORUS→ Delay p OVERDRIVE→ Delay pDISTORTION→ Delay p ENHANSER→ Delay p Stereo Phaser p FLANGER→ Delay pCHORUS/DELAY p FLANGER/DELAY p 48 3D Delay p Parameter List Multi TAP Delay pReverse Delay p Shuffle Delay p Distortion 2 p Lofi Noise pSpeaker Simulator p Overdrive 2 p Chorus Parameters 249 DELAY, PAN-DLYReverb Parameters SRV ROOM/SRV HALL/SRV Plate p System Parameters Setup Group p250 Preview Group p Parameter List Tune Group p251 252 User Group Preset a Group Preset B GroupPerformance List User PR-A PR-B No. Name Voice Key Assign User User Group PR-A Preset a GroupPatch List 253 254 Patch List PR-B Preset B Group PR-C Preset C Group Patch List PR-D Preset D Group PR-E Preset E Group255 256 Patch List PR-F Preset F GroupName Voice Key Assign Name Voice LSB Patch List PR-H GM2 Group257 Name Voice Rhythm Set List User User Group PR-A Preset a Group258 Rhythm Set List PR-B Preset B Group PR-C Preset C Group PR-D Preset D Group259 260 PR-E Preset E Group PR-F Preset F Group001 002 XV Pop Kit XV Rock Kit XV Jazz Kit XV Rust Kit PR-H GM2 Group 261001 002 003 004 005 006 007 008 009 262 263 Waveform ListWave Name 264 Waveform ListPWM MMM VOX 265 266 REV 909 Nzhh 267 268 Arpeggio Style ListStyle Motif Beat Pattern Accent Rate About Midi About Midi ConnectorsMidi Channels and Multi-timbral Sound Generators Control Change Midi Implementation270 Polyphonic Key Pressure 271 Midi Implementation Pitch Bend Change 272Program Change Channel Pressure 273 Universal Realtime System Exclusive Messages 274Global Parameter Control Data Transmission 275 Data set 1DT1 12H 276 277 278 279 Performance Common MFX 280System Keyboard Performance Common Performance Common Chorus 281Performance Common Reverb Performance Keyboard 282Performance Midi Performance Part Patch Common 283 Patch Common MFX 284 Patch TMT Tone Mix Table 285Patch Common Chorus Patch Common Reverb Patch Tone 286 Rhythm Common 287Rhythm Common MFX Rhythm Tone 288Rhythm Common Chorus Rhythm Common Reverb 289 Part Parameter 290System Parameter Common Parameter 291 Drum Setup Parameter Arpeggio Beat Pattern 292Arpeggio Style Arpeggio Motif Examples of Actual Midi Messages 293 Example of an Exclusive Message Calculating a Checksum 294 Arabian Scale 295Equal Temperament Just Temperament Tonic of C 296 Midi Implementation Chart RPN LSB, MSB 297 298 Specifications 299 Computer Cable Wiring Diagrams 300 Index 301 Index Expression 302 Info 303 Lower 304 Output 305 PCH Envelope 306 258 307 308 Setting TVF Envelope 309 310 Avis Africa Information