Quick Reference of Procedures

Controlling Tone Parameters of the Patch by the Slider or Pedal (Matrix Controller)

For each Patch, you can specify up to four control sources (MIDI messages for controlling). For each control source, you can specify up to four control destinations (parameters to be controlled).

1.Specify the MIDI messages to be controlled by each controller (the C1–C4 slider, control pedal etc.) (see previous).

2.Choose a control source (MIDI messages used for control). Control 1–4 parameters (PATCH/CONTROL/MATRIX CTRL SRC)

*If you do not need to set different control sources for each Patch, select SYS-CTRL 1–4, and use the Control 1–4 parameters (SYSTEM/CONTROL/SYS CTRL ASSIGN 1–4) to choose the MIDI messages that you wish to use for control.

3.Specify the control destination (the parameter to be controlled).

Dest parameter (PATCH/CONTROL/MATRIX CONTROL 1–4)

4.Set the Control Sensitivity (the amount of the effect that is applied).

Sns parameter (PATCH/CONTROL/MATRIX CONTROL 1–4)

5.Select the Control Tone (the Tone to which the effect is applied).

Tone parameter (PATCH/CONTROL/MATRIX CONTROL 1–4)

224

Page 224
Image 224
Roland XV-88 owner manual 224