Roland XV-88 owner manual Making Settings While Comparing Parts Palette Edit

Chapter 3. Creating Performances

10.When you finish making settings, press [EXIT] or [PERFORM] to return to the PERFORM PLAY page. An asterisk * appears at the left of the Performance group on the display. This shows Performance settings have been modified.

If you select another Performance in the group with an asterisk *, the modified Performance settings will be lost. To keep these modified settings, perform the save operation (p. 164).

Making Settings While Comparing Parts (Palette Edit)

When modifying Part settings for a Performance, the values for eight Parts (Part 1–8 or Part 9–16) will be displayed together on a single display. This is called the Palette page. This is useful when you wish to change parameter values while comparing each Part settings.

1.When modifying a Part, use or to move the cursor to the parameter you wish to modify.

2.Press [PALETTE EDIT] to call up the Palette page.

3.Press or to choose the Part to modify.

The Part number and the Patch or Rhythm Set name assigned to the Part will appear.

To switch between the palette page for Parts 1–8 and the palette page for Parts 9–16, press [1-8/9-16].

4.Use the VALUE dial, [INC/+]/[DEC/-], or the numeric keys to change the parameter value.

If you’ve made a mistake in setting a parameter value, or you have second thoughts about the changes, press [UNDO/COMPARE] to restore the value to what it was.

5.If you wish to edit other parameters,

press or to select the parameter that you wish to edit.

6.Repeat steps 3–5 to complete a Performance.

7.To exit the Palette page, press [PALETTE EDIT], thus extinguishing the button’s indicator.

Copying the Settings of Another Part (Part Copy)

Part settings from any desired Performance can be copied to any desired Part of the currently selected Performance. This function can help you save time.

1.Make sure a Performance is selected.

2.Press [UTILITY], getting its indicator to start blinking.

3.Press the numeric key [2], then or to call up the PERFORM PART CPY page.

Copy source Performance	Copy source
(group, number)	Performance name

Copy source Part Copy destination Part

4.Press the cursor buttons to move the cursor to the parameter you wish to set.

5.Either rotate the VALUE dial or press [INC/+]/[DEC/-] to set the value.

•To specify the currently selected Performance as the copy source, set Source to TEMP.

•When the cursor is located at Source, you can also use [USER], [PRESET], [A], and [B] to select a Performance group, and then use numeric keys to specify the Performance number.

•When the cursor is located at Part, you can also use [1-8/ 9-16] and ZONE/PART SELECT [1/9]–[8/16] to select the Part.

6.Press [ENTER] to execute the Copy operation.

When the Copy operation is executed, an * symbol will be displayed in front of the copy-destination Part.

7.Press [UTILITY] to return to the previous page.

50