Roland XV-88 owner manual System Parameters, Setup Group p, 250

Parameter List

System Parameters

SETUP Group (p. 168)

Display	Parameter		Value
SYSTEM SETUP	LCD	LCD contrast	1–10
	Power Up Mode	Power up mode	LAST-SET, DEFAULT
	Master Level	Master level	0–127
	Clock Source	System clock source	INT, MIDI
	System Tempo	System tempo	20–250
	Mix/Parallel	Mix/Parallel	MIX, PARALLEL
	Patch Remain	Patch remain switch	OFF, ON

MIDI Group (p. 169)

Display	Parameter		Value
PERFORM MIDI	Control Channel	Performance control channel	1–16, OFF
	Local	Local switch	OFF, ON
	Remote	Remote keyboard switch	OFF, ON
PATCH MIDI	Rx Ch	Patch/Rhythm set receive channel	1–16
	Tx Ch	Patch/Rhythm set transmit channel	1–16, Rx Ch, OFF
	Local	Local switch	OFF, ON
	Remote	Remote keyboard switch	OFF, ON
GM MIDI	Local Switch	Local switch	OFF, ON
	Remote	Remote keyboard switch	OFF, ON
RECEIVE MIDI	Program Change	Receive program change switch	OFF, ON
	Bank Select	Receive bank select switch	OFF, ON
TRANSMIT MIDI	Program	Transmit program change switch	OFF, ON
	Bank Sel	Transmit bank select switch	OFF, ON
	Active Sensing	Transmit active sensing switch	OFF, ON
SYSTEM MIDI	Rx GM On	Receive general MIDI system on switch	OFF, ON
	Rx GM2 On	Receive general MIDI 2 system on switch	OFF, ON
	Rx GS Reset	Receive GS reset switch	OFF, ON
	Device ID	Device ID number	17–32
	Rx Sys.Excl	Receive system exclusive switch	OFF, ON
	Tx Edit	Transmit edit data switch	OFF, ON

CONTROL Group (p. 171)

Display	Parameter		Value
KEYBOARD	Transpose	Transpose switch	OFF, ON
		Transpose value	-5 (G)– +6 (F#)
	Sens	Keyboard sensitivity	LIGHT, MEDIUM, HEAVY, FULL
	Vel	Keyboard velocity	REAL, 1–127
	Aft	Aftertouch sensitivity	0–100
HOLD PEDAL	Continuous	Continuous switch	OFF, ON
	Output	Pedal output	OFF, INT, MIDI, BOTH
	Polarity	Pedal polarity	STANDARD, REVERSE
CONTROL PEDAL 1	Assign	Pedal 1 assign	(*1)
	Output	Pedal 1 output	OFF, INT, MIDI, BOTH
	Polarity	Pedal 1 polarity	STANDARD, REVERSE
CONTROL PEDAL 2	Assign	Pedal 2 assign	(*1)
	Output	Pedal 2 output	OFF, INT, MIDI, BOTH
	Polarity	Pedal 2 polarity	STANDARD, REVERSE
C1 ASSIGN	Assign	C1 slider assign	(*2)
	Output	C1 slider output	OFF, INT, MIDI, BOTH
C2 ASSIGN	Assign	C2 slider assign	(*2)
	Output	C2 slider output	OFF, INT, MIDI, BOTH
C3 ASSIGN	Assign	C3 slider assign	(*2)
	Output	C3 slider output	OFF, INT, MIDI, BOTH
C4 ASSIGN	Assign	C4 slider assign	(*2)
	Output	C4 slider output	OFF, INT, MIDI, BOTH
SYS CTRL ASSIGN 1	Control 1, 2	System control assign 1, 2	(*2)
SYS CTRL ASSIGN 2	Control 3, 4	System control assign 3, 4	(*2)

*1: OFF, CC01–95 (except 32), PITCH BEND, AFTERTOUCH, OCT UP, OCT DOWN, START/STOP, TAP TEMPO, PROG UP, PROG DOWN

*2: OFF, CC01–95 (except 32), PITCH BEND, AFTERTOUCH

250