Roland XV-88 owner manual Confirming Midi Information for Each Part Info, Info Part Information

Chapter 3. Creating Performances

Confirming MIDI Information for Each Part (INFO)

INFO (Part Information)

The displays allow you to check various settings such as MIDI message reception status for each Part. This is convenient when you need to check that the sound generator is responding correctly to messages from the keyboard or external MIDI controller.

Mod (Modulation Information)

Breath (Breath Information)

Foot (Foot Information)

Vol (Volume Information)

Pan (Pan Information)

Exp (Expression Information)

Hld (Hold 1 Information)

Bnd (Pitch Bend Information)

Aft (Aftertouch Information)

Sy1–4 (System Control 1–4 Information)

The MIDI message specified as the Control 1–4 parameter (SYSTEM/CONTROL/SYS CTRL ASSIGN 1, 2)

Vo (Voice Information)

The number of voices used

When a value (except Vo) is changed in the INFO page, a MIDI message for the changed value is sent to the internal sound generator and the external MIDI device over the MIDI channel set for that Part.

Changing the Settings of the Patch/Rhythm Set Assigned to a Part

When using Patches in Performance mode, some settings such as effects settings will be affected by Performance settings. If you wish to edit a Patch/Rhythm Set while hearing how it will sound in the Performance, use this procedure:

*Here we explain how to change the setting of a Patch assigned to a Part. The procedure for changing the settings of Rhythm Sets is the same. Substitute “Rhythm Set” wherever “Patch” appears in a sentence.

1.Make sure the PERFORM PLAY page is displayed.

2.While holding down [PERFORM], press [PATCH]. Both button indicators will light. This will call up the PLAY page of the Patch assigned to the currently selected Part.

3.Press or to select the Part to which the selected Patch is assigned.

4.The following steps are the same as when you modify a Patch in Patch mode.

5.When you finish making settings, press [EXIT] to call up the Play page of the Patch assigned to the Part.

An asterisk * will be displayed at the left of the Patch group. This indicates the Patch settings have been modified.

If you select another Patch or Performance in the group with an asterisk *, the modified Patch settings will be lost. To keep these modified settings, perform the save operation (p. 164).

6.To return to the PERFORM PLAY page, press [PERFORM] or [EXIT].

56