Chapter 11. Using the XV-88 as a GM Sound Module (GM Mode)

GM CHORUS

GM REVERB

 

 

 

 

 

 

Type (Chorus Type)

Type (Reverb Type)

Selects the type of Chorus.

Selects the type of Reverb.

CHORUS 1–4: Chorus 1–4

SMALL ROOM: Reverb resembling that obtained in a small

FB CHORUS: Feedback Chorus

room.

FLANGER: Flanger

MEDIUM ROOM: Reverb resembling that obtained in a

Rate (Chorus Rate)

somewhat larger room.

LARGE ROOM: Reverb resembling that obtained in a large

 

 

 

Specifies the modulation frequency of the Chorus sound.

room.

Dpth (Chorus Depth)

MEDIUM HALL: Reverb resembling that obtained in a

medium-sized concert hall.

Sets the depth of the undulations of the Chorus sound.

LARGE HALL: Reverb resembling that obtained in a large

 

 

 

Fbk (Chorus Feedback Level)

concert hall.

Adjusts the amount of Chorus sound that is returned (fed

PLATE: Plate-type reverb effect.

back) to the Chorus. Higher settings will create a more

Time (Reverb Time)

complex Chorus effect.

Adjusts the length of the Reverb time.

Rev (Chorus Reverb Send Level)

Out (Reverb Output Assign)

Adjusts the amount of Reverb to be applied to the sound

Specifies how the sound routed through Reverb will be

routed through Chorus. If you don’t want to add the Reverb

output.

effect, set it to 0.

 

 

 

 

Out (Chorus Output Assign)

A: Output to the OUTPUT A (MIX) jacks in stereo.

B: Output to the OUTPUT B jacks in stereo.

 

 

 

Specifies how the sound routed through Chorus will be

 

 

 

 

output.

 

 

 

 

 

 

 

 

A: Output to the OUTPUT A (MIX) jacks in stereo.

 

If the Mix/Parallel parameter (SYSTEM/SETUP/

 

SYSTEM SETUP) is set to MIX, all sounds are output

B: Output to the OUTPUT B jacks in stereo.

 

 

from the OUTPUT A (MIX) jacks in stereo (p. 169).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If the Mix/Parallel parameter (SYSTEM/SETUP/

Making Settings for Receiving

 

SYSTEM SETUP) is set to MIX, all sounds are output

 

MIDI (MIDI)

 

from the OUTPUT A (MIX) jacks in stereo (p. 169).

 

 

 

 

 

 

 

 

These parameters determine how each Part will transmit and

 

 

 

receive MIDI messages.

 

 

 

MIDI

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Channel (MIDI Receive Channel)

Sets the MIDI receive channel for each Part. If you do not want to receive MIDI messages, turn this parameter OFF.

Chapter 11

195

Page 195
Image 195
Roland XV-88 owner manual Making Settings for Receiving, GM Chorus GM Reverb, 195