Chapter 12. Realizing the Potential of the XV-88

4.Connect the other end of the Computer cable to the COMPUTER connector on the left side of the XV-88.

Apple Macintosh series

Modem Port or

Printer Port

PC

Computer cable

XV-88 Rear Panel

Serial Port

Computer cable

When you record the performance data of the keyboard controller section to sequence software, you need to set the Local Switch to off, and set the Thru function of your software to on (p. 211).

Connecting with MIDI Connectors

If a MIDI interface (Roland Super MPU64, etc.) or a MIDI interface adaptor is connected to your computer, you can use the MIDI connectors to make connections.

For details on how to install the MIDI interface, refer to the owner’s manual for your MIDI interface.

1.Turn off the XV-88, your computer and all peripheral devices.

To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections.

2.Set the COMPUTER switch on the XV-88’s rear panel to MIDI.

The new setting of the COMPUTER switch will take effect when the power is turned on. Before changing the setting of the COMPUTER switch, you must first turn off the power on the XV-88.

Chapter 12

209

Page 209
Image 209
Roland XV-88 owner manual Connecting with Midi Connectors, 209