Roland XV-88 owner manual Keyboard and Controllers, Settings Control, Transmit Midi, System Midi

Chapter 9. Getting More Familiar with the XV-88 (System Functions)

TRANSMIT MIDI	Tx Edit (Transmit Edit Data Switch)
	When Performance, Patch or Rhythm Set settings are
	modified, specify whether the modified settings will be
	transmitted as system exclusive messages (ON) or not (OFF).
Specify how MIDI messages will be transmitted.

Program (Transmit Program Change Switch)	Keyboard and Controllers
Specifies whether Program Change messages will be	Settings (CONTROL)
transmitted (ON) or not (OFF).	KEYBOARD
Bank Sel (Transmit Bank Select Switch)
Specifies whether Bank Select messages will be transmitted
(ON) or not (OFF).
Active Sensing	Transpose (Transpose Switch/Value)
(Transmit Active Sensing Switch)	If you wish to transpose the range of the keyboard, turn this
Specifies whether Active Sensing messages will be	switch ON and set the desired amount of transposition (in
transmitted (ON) or not (OFF).	semitone steps). Tonic is indicated in parentheses ( ).
SYSTEM MIDI
		The transposed note name will be shown in the lower
		right of the Performance/Patch/Rhythm Set PLAY
		display.
		• When transposing the keyboard range on a PLAY
Specify how Exclusive messages will be transmitted and		display, press [TRANSPOSE] and indicator lights.
received.		• To change transpose amount on a PLAY display, hold
Rx GM On		down [TRANSPOSE] and press [-OCT] or [+OCT].
(Receive General MIDI System On Switch)	Sens (Keyboard Sensitivity)
Specifies whether General MIDI System On messages will be	Adjusts the keyboard’s touch.
received (ON) or not (OFF).
	LIGHT: Light weight synthesizer keyboard like
Rx GM2 On	MEDIUM: Standard
(Receive General MIDI 2 System On Switch)	HEAVY: Acoustic piano simulation
Specifies whether General MIDI 2 System On messages will	FULL: Full concert ground piano simulation
be received (ON) or not (OFF).	Vel (Keyboard Velocity)
Rx GS Reset (Receive GS Reset Switch)
	Specifies the velocity value that will be transmitted when
Specifies whether GS Reset messages will be received (ON)	you play the keyboard. If you want actual keyboard velocity
or not (OFF).	to be transmitted, set this to REAL. If you want a fixed
Device ID (Device ID Number)	velocity value to be transmitted regardless of how you play,
	specify the desired value (1–127).
When you want to transmit or receive System Exclusive
	Aft (Aftertouch Sensitivity)
messages, set this parameter to match the Device ID number
of the other MIDI device.	Specifies the Aftertouch sensitivity. Higher values will allow
Rx Sys.Excl (Receive System Exclusive Switch)	Aftertouch to be applied more easily. Normally you should
	leave this set to 100.
Specifies whether System Exclusive messages will be
received (ON) or not (OFF).

Chapter 9

171