Roland XV-88 owner manual Confirming the Settings for Each Zone Info, Beam Range, Beam Sens

Chapter 4. Zone Settings

D BEAM RANGE

Lower (D Beam Range Lower)

Specifies the lower limit of the range of the D Beam controller. Values below this setting will not be output.

Upper (D Beam Range Upper)

Specifies the upper limit of the range of the D Beam controller. Values above this setting will not be output.

It is not possible to set the lower limit value above the upper limit, nor can you set the upper limit value below the lower limit.

D BEAM SENS

D Beam Sensitivity

This sets the D Beam Controller’s sensitivity. The higher the value set, the more readily the D Beam Controller goes into effect. Ordinarily, this is set to 5.

The D Beam Controller sensitivity is a System setting, and as such cannot be saved as a Performance setting.

Confirming the Settings for Each Zone (INFO)

When a Single Performance is selected, this information is disabled.

INFO (Zone Information)

In this screen, you can check the following information for each Zone.

•MIDI transmit channel (ch): 1–16

•Transmit switch status (tx): On/Off

•Part connection status (part):

When the Local switch for the currently selected Zone is set to ON, you can check that Zone and the linked Part. Parts 1–16 are shown in order from left to right, and Parts for which the Zone’s MIDI transmit channel and the Part’s MIDI receive channel coincide are indicated by a o or a *. For Parts indicated by a *, you can check the group, number, and name of the Patch or Rhythm Set assigned to that Part in the lower part of the display.

When linked to multiple Parts, by pressing or , you can move the * and change the Part being checked.

64