Roland XV-88 owner manual Copying a Rhythm Set, Rhythm Tone Copy, Rhythm Set Effects Copy, 184

Chapter 10. Memory Settings (Utility Mode)

Copying a Rhythm Set

To copy the Rhythm Set settings, press [UTILITY] in Rhythm Set mode and perform Copy operation.

Rhythm Tone Copy

Individual Rhythm Tone (percussion sound) settings assigned to each key will be copied to each key in the current Rhythm Set.

Copy source Rhythm Set		Copy source
(group, number)		Rhythm Set name
	Copy source Key		Copy destination Key

The copy source and copy destination Key parameters can also be set by pressing a key on the keyboard.

When the Copy operation is executed, an * symbol will be displayed in front of the copy-destination key.

For more detailed information and instructions for this procedure, refer to “Copying the Settings of Another

Rhythm Tone (Rhythm Tone Copy)” (p. 94).

Rhythm Set Effects Copy

You can copy the effect settings from any Performance, Patch or Rhythm Set into the currently selected Rhythm Set.

Copy source	Copy source Performance/
	Patch/Rhythm Set
	(group, number, name)

Press to move to the next display, and then select the contents of the effect that you wish to copy.

Copy type

ALL: Multi-effects, Chorus, and Reverb settings

MFX: Multi-effects settings

CHORUS: Chorus settings

REVERB: Reverb settings

CHO&REV: Chorus and Reverb settings

For more detailed information and instructions for this

procedure, refer to “Copying Another Effect Setting

(Effects Copy)” (p. 161).

The Compare Function

For the Rhythm Tone Copy and Rhythm Set Effect Copy operations, you can use the Compare function.

The Compare function allows you to play the copy- source Rhythm Set. To play the Rhythm Set of the copy source, press [UNDO/COMPARE] to access the RHYTHM COMPARE page. The new Rhythm Set can also be selected from this page—however, it is not possible to select patches from CD-A–H or XP-A–D. After selecting the Rhythm Set, return to the previous page by pressing [UNDO/COMPARE] or [EXIT].

fig.10-08a.e

Copy source Rhythm Set (group, number, name)

•The Compare function cannot be used with Rhythm Tone Copy if either TEMP, a CD-A–H/XP-A–D Rhythm Set is selected as the copy-source Rhythm Set.

•The Compare function cannot be used with Rhythm Set Effect Copy if PERFORM is selected as the copy source.

•The Rhythm Set auditioned using the Compare function may sound slightly different than when it is played normally.

Rhythm Set Name Copy

You can copy the name of a Rhythm Set to the current Rhythm Set.

Copy source Rhythm Set (group, number, name)

184