Roland XV-88 owner manual Making Settings While Comparing Waveforms Palette Edit

Chapter 6. Creating Rhythm Sets

6.Use or to move the cursor to the parameter you wish to modify.

7.Use the VALUE dial, [INC/+]/[DEC/-], or the numeric keys to modify the parameter value.

If you’ve made a mistake in setting a parameter value, or you have second thoughts about the changes, press [UNDO/COMPARE] to restore the value to what it was.

8.If you wish to move to another display group, press [EDIT] to make its indicator light, and use the function buttons.

You can also move to another display group by holding

down [SHIFT] and using or . Since this can be done even when the [EDIT] indicator is dark, it is a faster way to get around because you don’t have to turn on the [EDIT] indicator each time.

9.Repeat steps 3–8 to complete a Rhythm Set.

10.When you finish making settings, press [EXIT] or [RHYTHM] to return to the RHYTHM PLAY page.

An asterisk * will be displayed at the left of the Rhythm Set group. This indicates that the Rhythm Set settings have been modified.

If you select another Rhythm Set in the group with an asterisk *, the modified Rhythm Set settings will be lost. To keep these modified settings, perform the save operation (p. 164).

Making Settings While

Comparing Waveforms

(Palette Edit)

When modifying Wave settings for a Rhythm Set, the values for four Waves will be displayed together on a single display. This is called the Palette page. Use it when you want to modify parameter values as you compare the settings of the four Waves.

1.When modifying a Wave, use or to move the cursor to the parameter you wish to modify.

2.Press [PALETTE EDIT] to call up the Palette page.

3.Press TONE SELECT [1]–[4], or to choose the Wave to modify.

The Wave number and Wave name appear in the display.

4.Use the VALUE dial, [INC/+]/[DEC/-], or the numeric keys to change the parameter value.

If you’ve made a mistake in setting a parameter value, or you have second thoughts about the changes, press [UNDO/COMPARE] to restore the value to what it was.

5.If you wish to edit other parameters,

press or to select the parameter that you wish to edit.

6.Repeat steps 3–5 to complete a Rhythm Tone.

7.To exit the Palette page, press [PALETTE EDIT], thus extinguishing the button’s indicator.

Copying the Settings of Another

Rhythm Tone

(Rhythm Tone Copy)

Rhythm Tone (percussion instrument) settings from any desired Rhythm Set can be copied to any desired key of the currently selected Rhythm Set. This function can help you save time.

1.Make sure a Rhythm Set is selected.

94