Max. 4 ft.
Horizontal
Run
Max. Two |
90° Elbows |
or One 90° |
and Two |
45° Elbows |
Wall Thimble and Trim Collar
Max. 15 ft.
Vertical Vent
Run
GF 100 DV II Nordic QT
GF 200 DV II Lillehammer
Wall Shield Installation
The decorative Wall Shield, included in the Miscellaneous Hardware bag, is used to obscure the vent hole in the wall in installations vented directly off the rear of the stove. Follow this procedure:
1.Remove the top two 1/4” hex head screws from the rear shroud of the stove.
2.Align the holes in the wall shield with the holes in the rear shroud.
3.Secure the wall shield to the stove with the two 1/4” hex head screws. See fig. 16.
Figure 13. Horizontal Termination with Vertical Rise.
| 21/2” |
12 ” | 64mm |
3053”
mm 76mm
Figure 15.
Wall Shield installation.
Figure 15. Termination Clearance to overhangs
13
