Samsung PS-42S5S manual Input Mode PC

Input Mode (PC)

Both screen position and size will vary depending on the type of PC monitor and its resolution. The table below shows all of the display modes that are supported:

Video Signal	Resolution	Vertical	Horizontal	Vertical	Horizontal
	(Dot X Line)	frequency (Hz)	frequency (kHz)	polarity	polarity
	640 x 350	70.086	31.469	P	N
	720 x 400	70.087	31.469	N	P
		59.940	31.469	N	N
	640 x 480	70.000	35.000	N/P	N/P
		72.809	37.861	N	N
		75.000	37.500	N	N
		56.250	35.156	N/P	N/P
IBM PC / AT	800 x 600	60.317	37.879	P	P
		70.000	43.750	N/P	N/P
Compatible
		72.188	48.077	P	P
		75.000	46.875	P	P
	848 x 480	60.000	31.020	P	P
		74.769	37.684	P	N
		60.004	48.363	N	N
	1024 x 768	70.069	56.476	N	N
		72.000	57.672	N/P	N/P
		75.029	60.023	P	P

(N: Negative / P: Positive)

◆The interlace mode is not supported.

◆The television might operate abnormally if a non-standard video format is selected.

◆480i/p, 576i/p, 720p, or 1080i is not available in PC mode.

Notes

◆The PC text quality for PS-42S5Sis optimum in WVGA mode (848 x 480@60Hz).

◆The PC text quality for PS-42S5His optimum in XGA mode (1024 x 768@60Hz).

◆When this television is used as a PC display, 32-bit colour is supported.

◆Your PC display screen might appear different depending on the manufacturer (and your particular version of Windows). Check your PC instruction book for information about connecting your PC to a television.

◆If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 31.5kHz (horizontal).

In some cases, abnormal signals (such as stripes) might appear on the screen when the PC power is turned off (or if the PC is disconnected). If so, press the SOURCE ( ) button to enter the Video mode. Also, make sure that the PC is connected.

◆When connecting a notebook PC to the television, make sure that the PC screen is displayed through only the television (Otherwise, random signals might appear).

◆When horizontal synchronous signals seem irregular in PC mode, check PC power saving mode or cable connections.

◆The Display Settings Table above complies to the IBM/VESA standards, and based on the analog input.

◆The best timing for the vertical frequency to each mode is 60Hz.

English - 65