Samsung PS-42S5S manual Programming the Remote Control for Other Components, Samsung

Programming the Remote Control for Other Components

Your TV comes equipped with a universal remote control. In
addition to controlling the TV, the universal remote control can
also operate a VCR, Cable box, DVD, and Set-Top Box (even if your
VCR, Cable box and DVD are made by manufacturers other than
Samsung).
➢	The remote control might not be compatible with all
	VCRs, DVD players, Cable boxes, and Set-Top Boxs.
1	Turn off your VCR (Cable box or DVD).
2	Press the MODE button to switch the remote control to the VCR
	(CATV or DVD) mode.
	➢ The remote control has five modes : TV, STB, VCR,
	CABLE and DVD.
3	Press the SET button.
4	Enter 3 digits of the VCR (Cable box or DVD) code listed on the
	next page for your VCR (Cable box or DVD).
	Example: To enter code “6”, press 0, 0, and 6.
	To enter code “76”, press 0, 7, and 6.
5	Press the POWER ( ) button. Your VCR (Cable box or DVD)
	should turn on. If it turns on, your remote control is now set
	correctly.
	➢ If it does not turn on, repeat the steps above, but try one of
	the other codes listed for your particular brand.
6	Once your remote control is set up, press the MODE button any
	time you want to use the remote control to operate the VCR
	(Cable box or DVD).
	➢ ◆ When your remote control is in STB, VCR, CABLE or
	DVD mode, the volume buttons still control your
	television’s volume.
	◆ When your remote control is in TV mode, the VCR or
	DVD control buttons (rewind, stop, play/pause, and fast
	forword) still operate your VCR or DVD.
English - 66