Samsung RF24FSEDBSR Making Ice, Using the Ice Off Function, Going on vacation, operating _21

Making Ice

•To fill the ice bucket to maximum capacity after

installation, follow these steps:

1.Allow your refrigerator to operate and cool down for 24 hours (or 1 full day).

-- Waiting 24 hours will allow your ice maker to cool properly.

check the water level

Test button

2.Dispense 4 to 6 ice cubes into the glass.

3.After 8, and then 16 hours, dispense a full

glass of ice.

•To test the ice maker, press the Test button on the ice maker. You will hear the refrigerator chime (ding-dong). When the chime sounds, release the Test button.

•The chime sounds automatically again to let you know the ice maker is working well.

If you want to remove the ice cubes CAUTION without using the ice bucket, please turn

the ice maker off and remove the ice maker’s front cover from the ice maker. Note that the ice cubes in the ice maker can spill out over the drawer.

Do not put food in the ice bucket. If you CAUTION store food in the ice bucket, the food can

strike the ice maker when you open or close the door, causing damage to the ice maker.

Note that the ice cubes in the ice bucket CAUTION may spill out over the drawer when you

remove the ice bucket from the drawer. If this occurs, be sure to clear the ice cubes that spilled out of the drawer.

If a power failure occurs, ice cubes may CAUTION melt, and then freeze together when

the power comes back on, causing the dispenser to stop working.

To prevent this problem, after a power failure, pull out the ice bucket and discard the residual ice or water.

If you use all the ice at once, you must repeat ice making Steps 2 and 3, left.

However, only wait 8 hours before dispensing the first 4 to 6 ice cubes. This will replenish the ice cubes and ensure maximum ice production.

Using the Ice Off Function

When you select the Ice Off mode, remove all ice cubes from the bucket. If you leave the ice cubes in the bucket, the ice cubes may clump together, making it difficult to remove them. To remove the ice bucket, push the button on the upper right of the bucket (1 in the illustration above), lift up the bottom, and then pull out. To put the bucket back in, push the bucket straight back until you hear a click. If the bucket does not fit, turn the helix 90 degree (see the last illustration on the right, above) and try again.

•Use only the ice maker provided with the

CAUTION refrigerator.

•Have a suitably qualified person install and connect the water supply line to the refrigerator.

•Connect the water supply line to a potable water supply only.

•To operate the ice maker properly, water pressure of 20 ~ 125 psi (138 ~ 862 kPa)is required.

Going on vacation...

If you have a long vacation or business trip and won’t use the water or ice dispensers for a long time:

-- Close the water valve. Otherwise, water leakage may occur.

-- Remove all food.

-- Unplug the refrigerator.

-- Wipe excess moisture from inside and leave the doors open. Otherwise, odor and mold may develop.

Ice Maker Do’s and Don’ts

•Do not put your fingers, hands or any other unsuitable objects in the chute or ice-maker bucket

-- It may result in personal injury or material damage.

operating _21

02operating