Samsung RF31FMESBSR Removing The Freezer Accessories, Using the doors, Super Extended Drawer

When the Flex Zone or LED lighting is not working, check the connectors [ ( 1 ), ( 2 ) shown below ] for cracks or leaks.

1.Refer to page 12 for disassembly instructions.

2.Open the cap cover rail with a flat-blade screw driver.

2

by lifting the guard up.

To re-install- Push down until the guard ( 1 ) locks into place.

1

2. Super Extended Drawer

To remove - Pull the drawer out to full extension. Tilt up the rear of the drawer and lift straight out. To re-install- Place the drawer onto the rails ( 4 ) by tilting it up. Lower the drawer into place until it is horizontal and slide the Drawer ( 3 ) in.

4

3

3. Freezer Drawer

To remove the freezer drawer - Pull the freezer drawer out fully. Tilt up the rear of the bin and lift it out to remove.

To re-install the freezer drawer - Place the bin into the rail assembly.

1

Using the doors

Ensure that the doors close all the way and are securely sealed.

When the refrigerator door is only partially open, it will automatically close. If the the door is opened more than its auto close range, it will remain open. You must close it manually.

REMOVING THE FREEZER ACCESSORIES

1. Freezer Room Guard

To remove - Remove the freezer room guard ( 1 )

40_ operating

DA68-02894A-10.indb 40

You can scratch the side of the bin if you CAUTION twist it left or right when disassembling or

re-assembling it.

Do not allow babies or children go inside CAUTION the freezer drawer. They could damage

the refrigerator and seriously injure themselves. Do not sit on the freezer door. The door may break. Do not allow children to climb into the freezer drawer.

Do not remove the divider.

CAUTION

2014. 5. 13. ￿￿ 11:47