Samsung RF31FMESBSR user manual Re-Attachingthe Refrigerator Doors, Disassembling The Flex Door

RE-ATTACHING THE REFRIGERATOR DOORS

To reattach the fridge doors after you have moved the fridge to its fi nal location, assemble the parts in reverse order.

1.The Water Line must be fully inserted into the center of the transparent coupler (Type A) or the Guide Lines (Type B) to prevent water leakage from the dispenser.

2.Insert the clip in the install pack and check that it holds the line firmly.

Type A	Type B
	Dispenser
Center of Transparent coupler	The Guide Lines
clip A (1/4”)	clip A (1/4”)
(6.35 mm)
	(6.35 mm)

3.Press the locking tab and separate the Wire Connector.

When reassembling it, be sure to connect CAUTION the wire harness.

If it is not connected, the Flex Room does not work.

4.Remove 1 hex head bolt from each side with a socket wrench (10mm).

DISASSEMBLING THE FLEX DOOR

1.Take out the Flex Zone ( 1 ) by lifting it up.

1

2.Take off the cover ( 2 ) w/harness with a flat- blade screwdriver (-).

2

12_ setting up

5.Lift up the Flex door from the rails.

Putting too much food into the freezer CAUTION drawers can prevent the freezer from closing completely and can cause frost

build-up.

DA68-02894A-10.indb 12 2014. 5. 13. ￿￿ 11:46