Installing and Using CO2 Cylinders
•Purchasing CO2 Cylinders (60L)
USE ONLY SODASTREAM carbonators (or CO2 cylinders (60L)). SAMSUNG and SODASTREAM will not be legally responsible for any damage, including, but not limited to, property damage caused by gas leakage from the use of a generic carbonator (or CO2 cylinder (60L)).
The sparkling water system of SAMSUNG Refrigerators is designed to work ONLY WITH SODASTREAM carbonators (or CO2 cylinders (60L)).
•Water Tube Hookup
Connect the white hose on the back of the refrigerator to water before installing the cylinder.
Installing a Cylinder in the Fridge
To install a cylinder in the refrigerator, follow these steps:
1.Open the Cylinder Cover.
2.Attach the Cylinder to the Regulator, and then rotate it clockwise.
3.Push the Cylinder into the Support.
4.Lock the Cylinder into place by pressing the Lever.
•If you don’t lock the cylinder into place, the refrigerator won’t produce sparkling water.
42_ operating
5.Press the Sparkling Water button for 3 seconds to turn the Cylinder Reset function on.
•If you replace the CO2 Cylinder during Sparkling Water Production (when the Carbonation Level Icons light up in rotation: 1 → 2 → 3 → 1. etc.), wait until the refrigerator completes production before turning the Cylinder Reset function on.
Because you interrupted production, the sparkling water may be over carbonated. If you want accurate carbonation level in the next production, you need to empty the tank before you start production.
Because the first 2 glasses of sparkling water dispensed after installation may contain residual substances, throw them out.
For information about dispensing sparkling water, see Operating Your French Door Refrigerator.
Storing Extra Cylinders
Store extra cylinders in a cool, open space, well out of the reach of children.
If sparkling water is produced when the internal refrigerator temperature or the temperature of the CO2 cylinder is high, you may hear a “horn sound”.
When you turn on your refrigerator for the fi rst time, you should not generate sparkling water production until after approximately 2 hours. When you purchase a new CO2 cylinder, be sure to store it in a cool dry place until you are ready to install it (23 ~ 68 °F
Replacing a Cylinder
If the carbonation level is abnormally low, this means the CO2 cylinder is empty.
In this case, we recommend that you replace the cylinder with a new one.
To replace a cylinder, follow these steps:
1.Lift up the Lever holding the cylinder in place.
2014. 5. 13. 11:47 |
