| Adjustment |
Fixed part | part |
Adjusting the freezer drawer level
Adjustment part
p u
The left door is fixed. To make minor adjustments between doors, adjust only the right door.
1.Pull out the Convertible door ( 1 ) to expose the lower hinge ( 2 ).
2.Insert the supplied allen wrench (3/16”) ( 3 ) into the shaft ( 4 ) of the lower hinge.
3.Please adjust the height by turning the hex wrench ( 3 ) clockwise ( DOWN ) or counter-
clockwise ( UP ).
When you turn the hex wrench counter-
clockwise (
), the door will move up.
2 |
|
3 | 3 |
4 |
|
1
1.After adjusting the doors, insert the supplied fastener ( 6 ) using a pliers ( 5 ) in the gap between the
2 fastener are enclosed with the refrigerator. The thickness of each fastener is 0.04”.
Freezer Drawer
1.Locate the
Unscrew the 8 Phillips screws ( 2 ) slightly to loosen the door.
1
2
2. Loosen the controller |
|
screw ( 3 ) with a Phillips | 3 |
screwdriver (+). |
|
3.Find the best level to align the door
slope.
• After 
adjustment, tighten the 
controller screw ( 3 ) and then philips screws.
Example) The slope is about 0.08inch (2mm) as shown below. - Rotate the height adjuster to
Slope
Reference 
plane 
01setting
setting up _09
