Contents
Table of Contents
Bluetooth user manual
RIF-BT10
RIF-BT10C
RIF-BT10
CableUSBBTCableSerialBT
SRP 350 V3.0.5E above SRP 270 V3.0.3E above
Category
4 Master can send data to max 7 printers at the same time
Port Setting 19200, 8, none, 1, hardware
Refer to Attachment 1.Virtual serial port driver installation
Advanced Setting 4096, 4096, 16, 0
Refer to Attachment 2. Virtual serial port setting
“Bluetooth control message
Refer to Attachment 5. Bluetooth master Setting
1. Connect Bluetooth Master to USB port of PC
1. Open Device Manager as the below path
Attachment 2. Virtual serial port setting
Start Control Panel System Hardware Device Manager
V1.00
4. Set as below and apply “OK”
Model
19200
Baud ratebps
Hand shaking
5. Set as below and apply OK. slave, 19200, hardware
2. Execute “BluetoothConfigV2.x.exe”
Attachment 4. Bluetooth slave setting
V1.00
2. Execute “BluetoothConfigV2.x.exe”
Attachment 5. Bluetooth master setting
V1.00
7. Select “Search” The printer should be Power ON
6. Select “Register Printers”
9. Click “Close”
10. Select “Configure Adapter” and check “auto connect to printers”
12. Disconnect the Bluetooth main Master/Slave from the PC
11. Click “OK” and then “Quit” to exit
1 Bluetooth address Individual address of each Bluetooth module
V1.00
Attachment 6. Printer driver installation & Test page printing
7. Click “OK” and then “Close”
6. Set the port settings as below 19200, 8, none, 1, hardware
8. Open the printer drive again and click “Test Page Print”
9. The windows test page prints