Manuals / Samsung / Computer Equipment / Network Card

Samsung RIF-BT10 user manual Category

Models: RIF-BT10

1 17

Page 3

2. Specifications


	Category		Specification

Model name			RIF-BTM10

Connection System		POS System
		(Printer : SRP-350, SRP-270)


Interface Port		USB(PC), RS-232C(PC), UART(Printer)

Flow control		Hardware(RTS/CTS)

Transmission speed (bps)		19200,9600

	Power	DC 5V/150mA
		(USB port or RS-232C Pin 9 or Printer power)


Bluetooth Specification		V1.0B &		V1.1

Service Distance		Max 100 m (Class 1)

Network Support		Multi-Connection Support = N:7(max N=infinity)
(Master: Slave)		Simultaneous printing = 1 : n (max. n=7)

Printing Profile Support		SPP(Serial Port Profile) &
		HCRP(Hardcopy Cable Replacement Profile)


Dimensions(W x L x H)		70 x 45 x 11 mm

Rx/Tx Buffer		Rx Buffer: 1024 byte
		Tx Buffer:		512 byte

V1.00

WWW.SAMSUNGMINIPRINTERS.COM

Page 3

Image 3

Contents

Bluetooth user manual Table of ContentsRIF-BT10 SRP 350 V3.0.5E above SRP 270 V3.0.3E above RIF-BT10RIF-BT10C CableUSBBTCableSerialBTCategory 4 Master can send data to max 7 printers at the same time Refer to Attachment 2. Virtual serial port setting Refer to Attachment 1.Virtual serial port driver installationPort Setting 19200, 8, none, 1, hardware Advanced Setting 4096, 4096, 16, 0“Bluetooth control message Refer to Attachment 5. Bluetooth master Setting1. Connect Bluetooth Master to USB port of PC V1.00 Attachment 2. Virtual serial port setting1. Open Device Manager as the below path Start Control Panel System Hardware Device Manager4. Set as below and apply “OK” Hand shaking 19200Model Baud ratebpsV1.00 2. Execute “BluetoothConfigV2.x.exe”5. Set as below and apply OK. slave, 19200, hardware Attachment 4. Bluetooth slave settingAttachment 5. Bluetooth master setting 2. Execute “BluetoothConfigV2.x.exe”V1.00 7. Select “Search” The printer should be Power ON 6. Select “Register Printers”11. Click “OK” and then “Quit” to exit 10. Select “Configure Adapter” and check “auto connect to printers”9. Click “Close” 12. Disconnect the Bluetooth main Master/Slave from the PC1 Bluetooth address Individual address of each Bluetooth module V1.00 Attachment 6. Printer driver installation & Test page printing9. The windows test page prints 6. Set the port settings as below 19200, 8, none, 1, hardware7. Click “OK” and then “Close” 8. Open the printer drive again and click “Test Page Print”