Manuals / Samsung / Computer Equipment / Network Card

Samsung RIF-BT10 Attachment 2. Virtual serial port setting, Open Device Manager as the below path

Models: RIF-BT10

1 17

Download 17 pages 13.61 Kb

Page 8

1.Open Device Manager as the below path:

Attachment 2. Virtual serial port setting

1.Open Device Manager as the below path:

:Start > Control Panel > System > Hardware > Device Manager

2. Select “USB Serial Port (COM x)” that is installed newly. Go to “Properties” by right button of mouse.

V1.00

WWW.SAMSUNGMINIPRINTERS.COM

8

Image 8

Samsung RIF-BT10 user manual Attachment 2. Virtual serial port setting, Open Device Manager as the below path, V1.00

Contents

RIF-BT10 Bluetooth user manualTable of Contents RIF-BT10 RIF-BT10CCableUSBBTCableSerialBT SRP 350 V3.0.5E above SRP 270 V3.0.3E aboveCategory 4 Master can send data to max 7 printers at the same time Refer to Attachment 1.Virtual serial port driver installation Port Setting 19200, 8, none, 1, hardwareAdvanced Setting 4096, 4096, 16, 0 Refer to Attachment 2. Virtual serial port settingRefer to Attachment 5. Bluetooth master Setting “Bluetooth control message1. Connect Bluetooth Master to USB port of PC Attachment 2. Virtual serial port setting 1. Open Device Manager as the below pathStart Control Panel System Hardware Device Manager V1.004. Set as below and apply “OK” 19200 ModelBaud ratebps Hand shaking2. Execute “BluetoothConfigV2.x.exe” 5. Set as below and apply OK. slave, 19200, hardwareAttachment 4. Bluetooth slave setting V1.00V1.00 Attachment 5. Bluetooth master setting2. Execute “BluetoothConfigV2.x.exe” 6. Select “Register Printers” 7. Select “Search” The printer should be Power ON10. Select “Configure Adapter” and check “auto connect to printers” 9. Click “Close”12. Disconnect the Bluetooth main Master/Slave from the PC 11. Click “OK” and then “Quit” to exit1 Bluetooth address Individual address of each Bluetooth module Attachment 6. Printer driver installation & Test page printing V1.006. Set the port settings as below 19200, 8, none, 1, hardware 7. Click “OK” and then “Close”8. Open the printer drive again and click “Test Page Print” 9. The windows test page prints