Samsung RSG307AABP, RSG307AAWP Levelling the Refrigerator, Making Minor Adjustments to the Doors

Removing the Fridge Door

1.Remove a screw on the upper hinge cover 1 . With the door open, disengage the two locking tabs with a fl at-head screw driver 2 and remove it while the lifting up the rear of the cover 3 , and then disconnect the wires by gently pulling them apart 4 .

1

3

4

2

When the Freezer part is lower than the Fridge part.

Insert a fl at-blade screwdriver into a slot on the Freezer Leg, then turn it clockwise.

Screw Driver

Freezer Leg

2.Removing the FIXER HINGE ,and next take off the upper hinge. Be careful that the door does not fall on you as you are removing it.

When the Fridge part is lower than the Freezer part.

Insert a fl at-blade screwdriver into a slot on the Fridge Leg, then turn it clockwise.

Be sure to keep track of all parts you are removing.

3. Remove the door from the 6

lower hinge 5 by lifting the door straight up 6 .

5

Reattaching the Fridge door

To reattach the fridge doors, replace parts in reverse order.

LEVELLING THE REFRIGERATOR

Now that the doors are back on the refrigerator, you want to make sure the refrigerator is level so that you can make fi nal adjustments. If the refrigerator is not level, it will not be possible to get the doors perfectly even.

Fridge Leg

Screw Driver

Refer to the next section for the best way to make very minor adjustments to the doors.

MAKING MINOR ADJUSTMENTS TO THE DOORS

Remember, a level refrigerator is necessary for getting the doors perfectly even. If you need help, review the previous section on levelling the refrigerator.

When the door of the fridge is higher than the freezer

Insert a fl at-blade screwdriver into a slot on the freezer leg, then turn it clockwise.

08_ setting up

DA68-02500A.indb 08 2012.5.16 2:52:14 PM