Check the amount of water supplied to the ice tray.
1.Lift up the icemaker cover and gently pull it out.
2.When you press the Test button for 3 seconds, the ice cube container is fi lled with water from the water supply tap. Check to make sure the amount of water is correct (see the illustration below). If the water level is too low, the ice cubes will be small. This is a water pressure problem from within the main water pipes, not the refrigerator.
1
Check the water
2 level
Ice maker | Test button |
|
-It will take a few minutes for the water to
01 SETTING UP
CAUTION
reach the correct level after you push the Test button.
-Do not press the test button continuously when the tray is fi lled with ice or water. Water may overfl ow or ice jamming may occur.
-When the bucket is not installed, the ice maker does not work.
-When Ice Off blinks on the display panel, reinsert the bucket and/or make sure it’s installed properly.
setting up _11
2012.5.16 2:52:18 PM |
