Samsung SCC-643(P) instruction manual Installing SCC-643P, Installation Precautions

Installing SCC-643(P)

Installation Precautions

1)Make sure that the installation site can sufficiently support a minimum of four times the net weight of the SCC-643(P) Combi Dome Camera and

other accessories.

2)Install in an area where the space above the ceiling board is over 18 cm (7 in.) high.

3)Use the supplied screws to fasten the camera to the bracket assembly.

4)Keep persons away from the installation area, as there is a risk of falling objects.

Also, move valuables to a safe location before installation.

Separately Sold Products for Installation

Depending on the installation site, it may be convenient to use one of the following products.

1) CEILING MOUNT BRACKET (SBR-100DCM)

This bracket is used for installing the SMARTDOME CAMERA in the plenum above the drop ceiling.

2)WALL MOUNT ADAPTOR (SADT-100WM)

This adaptor is used for installing the indoor housing or the outdoor housing for the

Combi Dome Camera on a wall.

3)INDOOR HOUSING (SHG-120)

This housing is used for installing the Combi Dome Camera to an indoor wall or a ceiling.

4) OUTDOOR HOUSING (SHG-220)

This housing is used for installing the Combi Dome Camera to an outdoor wall or a ceiling.

E

2-5 2-6