Samsung SCC-643(P) instruction manual Video SET Menu, Zoom Speed, Motion DET, Exit, Iris

ZOOM SPEED

In the ZOOM SPEED menu you can select the speed of the ZOOM Key (Tele/Wide).

Use the [Left] or [Right] keys in the ZOOM SPEED menu to select

the speed.

1 : Magnification x 22 takes about 18 seconds. Slowest speed

2 : Magnification x 22 takes about 10 seconds. Low speed

3 : Magnification x 22 takes about 6 seconds. High speed

4 : Magnification x 22 takes about 4 seconds. Fastest speed

(CAMERA SET)

CAMERA ID	OFF
V-SYNC	INT
COLOR/BW	AUTO...
ZOOM SPEED	3
MOTION DET	OFF
EXIT	QUIT

If you press [ENTER] once more, you will exit the "AREA" setting menu.Use the "SENSITIVITY" menu to set the sensitivity of the MOTION Detection.The Higher it is set, the more sensitive the Motion Detection moves.

➜

Use the [Left, Right, Up, Down] Keys Press the [5] key to assign an area

or to cancel the area.

E

MOTION DET

In MOTION DET, you can set the Motion Detection function, Motion Detection Sensitivity, and the Area of Motion Detection. If the Motion Detection function is set, the movement of an intruder can be detected. When motion is detected,

it sets off the Alarm signal of the Controller.

*Motion Detection function does not operate while handling slow SHUTTER, PRESET,

SCAN, AUTO MODE(AUTO PAN, PATTERN) or MANUAL KEY (JOYSTICK, ZOOM, FOCUS, IRIS).

EXIT

(CAMERA SET)
CAMERA ID	OFF
V-SYNC	INT
COLOR/BW	AUTO...
ZOOM SPEED	3
MOTION DET	ON...
EXIT	QUIT

➜

Press [Enter]

(MOTION DET)

AREA PRESET...

SENSITIVITY MEDIUM RET

The EXIT menu is used to quit the CAMERA SET menu of the SCC-643(P) and return to the MAIN MENU.

- QUIT: Ignores the changed information and

restores the saved information.

- SAVE: Saves the information of the setting

condition of the menu.

- PRESET: Ignores the changed information and

(CAMERA SET)
CAMERA ID	OFF
V-SYNC	INT
COLOR/BW	AUTO...
ZOOM SPEED	3
MOTION DET	OFF
	QUIT
EXIT

If you select ON and press the [ENTER] key, the “MOTION DET” submenu screen will come up.

The “AREA” menu, from which you can specify screen areas where the Motion

Detection function will be applied, can be set to either PRESET or USER. If you set the “AREA” menu to PRESET, the Motion Detection function will be applied to the areas preset as factory defaults.

If you set the AREA menu to USER and press the [ENTER] key, you can choose from 48 areas where you want to apply the Motion Detection function.

Use the [5] key and [left, right, up, down] keys to move and select the motion detection area.

Press the [5] key to assign an area or to cancel the area.

restores the initial factory defaults of

the menu.

2. VIDEO SET MENU

IRIS

The video output level of the monitor can be controlled by the IRIS lens depending on the level of the incoming light.The video output level can be set in the ALC menu.The opening and shutting of the Iris lens can be set manually in the MANU menu.

3-6 3-7