12.5 <
Maintenance>
Note
You can set the machine to disregard the Toner Empty
Replace Toner message and to continue printing. See page
12.6.
1Open the front cover.
2Pull the toner cartridge out.
3Remove the new toner cartridge from its bag.
4Remove the packing tape and roll the cartridge 5 or 6 items to
distribute the toner.
Thoroughly roll the cartridge to assure maximum copies per
cartridge. Save the box and the plastic bag for shipping.
Note
If toner gets on your clothing, wipe it off with a dry cloth and
wash clothing in cold water. Hot water sets toner into fabric.
Caution
Do not touch the green underside of the toner cartridge.
Use the handle on the cartridge to avoid touching this area.
5Hold the toner cartridge by the handle and slowly insert the cartridge
into the opening in the machine.
Tabs on the sides of the cartridge and corresponding grooves within
the machine will guide the cartridge into the correct position until it
locks into place completely.
6Close the front cover. Make sure that the cover is securely closed.
Cleaning the drum
If there are streaks or spots on your print, the OPC drum of the toner
cartridge may require cleaning.
1Before starting the cleaning procedure, make sure that paper is
loaded in the machine.
2Press Menu until Maintenance appears on the top line of the
display.
3Press Enter when Clean Drum appears.
4Press Enter when Yes appears.
The machine prints out a cleaning page. Toner particles on the drum
surface are affixed to the paper.
If the problem remains, repeat steps 1 through 4.
Cleaning the drum automatically
You can set your machine to print a cleaning page automatically every
600 pages.
1Press Menu until Maintenance appears on the top line of the
display.
2Press the Scroll buttons until Auto Cleaning appears and press
Enter.
3Press the Scroll buttons until On appears and press Enter.
4Press Stop/Clear to return to Standby mode.
Sending new toner notification
You can set your machine to automatically send a fax to your service
company or dealer to notify them that your machine requires a new toner
cartridge when the toner cartridge needs to be replaced. The fax number
needs to be set by your dealer prior to using this feature, otherwise the
machine cannot send a notification even though you turn this service on.
1Press Menu until Maintenance appears on the top line of the
display.
2Press the Scroll buttons until Notify Toner appears and press
Enter.
3Press the Scroll buttons until On appears and press Enter.
4Press Stop/Clear to return to Standby mode.