175
2. Using a Network-Connected Machine
Wired network setup
4

Printing a network configuration report

You can print Network Configuration Report from the machine’s control panel
that will show the current machine’s network settings. This will help you to set
up a network.
Accessing menus may differ from model to model (see "Menu overview"
on page 32).
It may be necessary to press OK to navigate to lower-level menus for
some models.
The machine has a display screen: Press the (Menu) button on the
control panel and select Network > Network Configuration.
The machine has a touch screen: Press (Setup) on the touch screen >
Machine Setup > Next > Reports > Network Configuration.
Using this Network Configuration Report, you can find your machine’s MAC
address and IP address.
For example:
MAC Address: 00:15:99:41:A2:78
IP Address: 169.254.192.192
5

Setting IP address

The machine that does not support the network interface, it will not be
able to use this feature (see "Rear view" on page 22).
TCP/IPv6 is not supported by this program.
First, you have to set up an IP address for network printing and managements.
In most cases a new IP address will be automatically assigned by a DHCP
(Dynamic Host Configuration Protocol) server located on the network.
IPv4 configuration using SetIP (Windows)
Before using the SetIP program, disable the computer firewall from Control
Panel > Security Center > Windows Firewall.
The following instructions may differ for your model.