System setup
239
3. Useful Setting Menus
Default Mode Sets the machine’s default mode among fax mode, copy
mode, or scan mode.
Default Paper Size You can set the default paper size to use.
Power Save
Sets how long the machine waits before going to power
save mode.
When the machine does not receive data for an extended
period of time, power consumption is automatically
lowered.
System Timeout
Sets the time that the machine remembers previously
used copy settings. After the timeout, the machine
restores the default copy settings.
Job Timeout
Sets the length of time the printer waits before printing
the last page of a print job that does not end with a
command to print the page.
Held Job Timeout Sets the time to hold the temprarily stopped job.
Wakeup Event
When this option is "On", you can wake up the machine
from the power saving mode with the following actions:
• loading paper in a tray
• opening or closing the front cover
• pulling a tray out or pushing a tray in
• connecting a USB memory device (only for the models
that support USB memory devices)
Item Description
Auto Continue
Determine whether or not the machine continues
printing when it detects the paper does not match the
paper settings.
•0 Sec: This option allows you to continue printing
when the paper size you have set is mismatched with
the paper in the tray.
•30 Sec: If a paper mismatch occurs, an error message
will display. The machine waits for about 30 second,
then automatically clear the message and continue
printing.
•Off: If a paper mismatch occurs, the machine waits
until you insert the correct paper.
Altitude
Adjustment
Optimize print quality according to the machine’s
altitude.
Auto CR Allows you to append the required carriage return to
each line feed, which is useful for Unix or DOS users.
Firmware Version Shows the product’s firmware version.
Paper Stacking
If you use a machine in a humid area, or you are using the
damp print media caused by a high humidity, the print-
outs on the output tray may be curled and may not be
stacked properly. In this case, you can set the machine to
use this function to let print-outs stacked firmly. But,
using this function will make the print speed slow.
Item Description