Important safety instructions

17.POWER SOURCES:

The CAMCORDER should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supply at your home, consult your appliance dealer or local power company. A CAMCORDER is intended to be operated from battery power, or other sources, refer to the operating instructions.

18.GROUNDING OR POLARIZATION:

This CAMCORDER may be equipped with either a polarized 2-wire AC line plug (a plug having one blade wider than the other) or a 3-wire grounding type plug, a plug having a third (grounding) pin. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug still fails to fit, contact your electrician to replace your outlet. Do not defeat the safety purpose of the polarized plug.

19.POWER-CORD PROTECTION:

Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords or plugs, convenient receptacles, and the point where they exit from the unit.

20.OUTDOOR ANTENNA GROUNDING:

CAMCORDER, be sure the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the National Electrical Code, ANSI/NFPA No. 70-1984, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire and supporting structure, grounding of the mast and supporting structure, grounding of the lead-in wire to

an antenna discharge unit, size of grounding to conductors, location of antenna-discharge unit, connection to grounding electrodes and requirements for the grounding electrode. See figure below.

 

 

ANTENNA

 

 

LEAD IN

 

 

WIRE

 

 

GROUND

 

 

CLAMP

 

 

ANTENNA

 

 

DISCHARGE UNIT

 

 

(NEC SECTION 810-20)

 

ELECTRIC

 

 

SERVICE

GROUNDING CONDUCTORS

 

EQUIPMENT

 

 

(NEC SECTION 810-21)

 

 

GROUND CLAMPS

 

 

POWER SERVICE GROUNDING

 

 

ELECTRODE SYSTEM

vi

 

(NEC ART 250, PART H)

NEC NATIONAL ELECTRICAL CODE

21.LIGHTNING:

For added protection of this CAMCORDER during a lightning storm or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the CAMCORDER due to lightning and powerline surges.

22.POWER LINES:

An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

23.OVERLOADING:

Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.

24.OBJECTS AND LIQUIDS:

Never push objects of any kind into this CAMCORDER through openings as they may touch dangerous voltage points or short out a part that could result in a fire or electric shock. Never spill liquids of any kind onto the CAMCORDER. Should spillage occur, unplug unit and have it checked by a technician before use.

25.SERVICING:

Do not attempt to service this CAMCORDER yourself. Opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

26.DAMAGE REQUIRING SERVICE:

Unplug this CAMCORDER from the wall outlet and refer servicing to qualified service personnel under the following conditions:

a.When the power-supply cord or plug is damaged.

b.If any liquid has been spilled onto, or objects have fallen into the

CAMCORDER.

c.If the CAMCORDER has been exposed to rain or water.

d.If the CAMCORDER does not operate normally by following the operating instructions, adjust only those controls that are covered by the operating instructions. Improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the CAMCORDER to its normal operation.Z

e.If the CAMCORDER has been dropped or the cabinet has been damaged.

f.When the CAMCORDER exhibits a distinct change in performance, this indicates a need for service.

Page 5 Page 7
Page 6
Image 6
Samsung SMX-F50BN/SMX-F50RN/SMX-F50SN/SMX-F50UN, SMX-F530BN/SMX-F530RN/SMX-F530SN/SMX-F530UN Important safety instructions
Page 5 Page 7

SMX-F53BN/SMX-F53RN/SMX-F53SN/SMX-F53UN, SMX-F54BN/SMX-F54RN/SMX-F54SN/SMX-F54UN, SMX-F500BN/SMX-F500RN/SMX-F500SN/SMX-F500UN, SMX-F50BN/SMX-F50RN/SMX-F50SN/SMX-F50UN, SMX-F530BN/SMX-F530RN/SMX-F530SN/SMX-F530UN specifications

The Samsung SMX-F530 series, including models SMX-F530BN, SMX-F530RN, SMX-F530SN, and SMX-F530UN, along with the SMX-F50, SMX-F500, and SMX-F54 series, exemplify Samsung's commitment to innovation in the camcorder market. These models cater to both amateur and semi-professional videographers seeking high-quality performance in a lightweight and portable design.

One of the standout features of the SMX-F530 series is its 1/5.8" 1.5 MP CCD sensor, which ensures impressive image quality with vibrant colors and sharp details. This sensor works in concert with Samsung's powerful image processing technology, delivering videos in stunning 1080p resolution. The integrated 20x optical zoom lens allows for excellent subject framing, making it easy to capture distant subjects without significant loss in quality.

The SMX-F50 and SMX-F500 series offer similar specifications but come with additional enhancements like advanced optical image stabilization (OIS). This technology significantly reduces camera shake, enabling smooth video recording, even in dynamic shooting conditions. The OIS feature is particularly beneficial for users who are recording while moving, ensuring their final product remains steady and professional-looking.

Another notable characteristic of these camcorders is their dual memory card slots, which support both SD and SDHC cards. This feature provides ample storage for extended shooting sessions, allowing users to easily switch cards without interrupting their recordings. The user-friendly interface, combined with a robust menu system, enables quick access to various shooting modes, including Night Mode and a range of scene selections, ensuring optimal results in different lighting conditions.

Wireless connectivity options are another highlight, with features such as Wi-Fi capability. This allows users to stream footage to their devices or upload videos directly to social media platforms, enhancing the sharing experience. Additionally, the built-in USB port simplifies data transfer, making it easier to back up footage or share it with friends and family.

With their overall design focused on usability, portability, and advanced imaging technology, the Samsung SMX-F53, SMX-F54, SMX-F50, and SMX-F500 camcorders stand out in the crowded market. Whether capturing precious family moments, documenting travel adventures, or producing creative projects, these camcorders are well-equipped to meet the diverse needs of users while delivering exceptional video quality. This blend of features and technology underscores Samsung’s dedication to creating versatile devices that appeal to video enthusiasts at any level.
Top Page Image Contents