108 109
108 109
Troubleshooting
Symptom Explanation/Solution
When the screen is exposed
to direct sunlight during
recording, the screen turns
red or black for an instant.
Do not expose the LCD screen to direct sunlight.
During recording, the date/
time does not display. Set “Date/Time Display” to on. page 84
The beep sound is not
heard.
Set the "Beep Sound" to “On.”
The beep sound is temporally off while the camcorder records videos.
When the Audio/Video cable jack is connected to the camcorder, the beep sound will automatically turn
off.
There is a time difference
between the point where
you press the Recording
start/stop button and the
point where the recorded
video starts/stops.
On your camcorder, there may be a slight time delay between the point where you press Recording
start/stop button and the actual point where the recorded video starts/stops. This is not an error.
The recording stops.
The internal temperature of your camcorder is unusually high. Turn off your camcorder and leave it for a
while in a cool place.
Your camcorder is damp and moist inside (condensation). Turn off your camcorder and leave it for
about 1 hour in a cool place.
You cannot record a photo
image.
Set your camcorder to Record mode. page 24
Release the lock on the write-protection tab of the memory card if set.
The storage media is full.
Use a new memory card or format the storage media. page 80
Remove unnecessary images. page 69