Samsung SNS-110P manual Rear of SNS-110

Rear of SNS-110

ALARM IN R/O RX TX RS-232C ETHERNET DC 5V

1 2 G 3 4 G RA RC - + - +

1 2 3456

	Name		Function
① Alarm Input(1,2,3,4)		Sensor Input : 1,2,3,4	Connects to maximum of 4 alarm sensors.
		Signal GND : G
② R/O (Relay Out)		RA	Connected to the external device for remote control
		RC
			Connects to RS-485 cable and remotely regulate
③ RS-485(+,-)		RX(+,-)	PAN / TILT / ZOOM / FOCUS
			controllers.
		TX(+,-)	Full Duplex : use RX and TX.
			Half Duplex : use TX .
			Connects to console and an external modem through
			the RS-232C cable connection.
④ RS-232C		9Pin DSub Connector	❈ You are recommended to use the RS-232C
			cable packed with this
			SNS-110.
			❈The current version does not support
			connecting an External Modem.
⑤ Network Port		RJ-45 Connector	Connects to Ethernet (10BaseT/110BaseT) and cable
			modem network.
			Supplies the power to SNS-110 with a DC 5V input
⑥ Power In			terminal
			❈Only use the compatible adapter enclosed in
			the SNS-110 package and supply DC 5V.

9