Functional Description
15.Auto Run
▶Main Menu/Sequence Setting/Auto Run
Functional Description
P/T Setting
Main Menu
If there is no controller operation by the user for a certain time, the sequence operation designated by the user will be
16.Pan/Tilt Limit
▶ Main Menu/P/T Setting/Pan/Tilt Limit
①Camera Setting
② Sequence Setting
③ P/T Setting
④ OSD Setting
⑤ Alarm Setting
⑥ Initialize Status
➡
Sequence Setting
①Preset
② Swing SEQ
③ Group SEQ
④ Tour SEQ
⑤ PTZ Trace
⑥ Auto Run
Power On | Resume | ON |
MD Dwell | Time | OFF |
executed.
Mode :
-Home :Auto run Home Position (Refet to the Preset
Menu.)
-Preset :Auto run a selected preset number.
-Swing :Auto run a selected Swing mode.
-Group :Auto run a selected Group mode.
-Tour :Auto run a selected Tour mode.
-Trace :Auto run a selected trace mode.
-A.Pan :Auto run a
Time :
Enables setting up an Auto Run duration. (The duration can be 1~60 seconds, or 1~60 minutes.)
Main Menu
①Camera Setting
② Sequence Setting
③ P/T Setting
④ OSD Setting
⑤ Alarm Setting
⑥ Initialize Status
➡
P/T Setting
①Pan/Tilt Limit
② Area Setting
③ Area Masking
Prop. P/T | ON |
Digital Flip | ON |
Image Hold | OFF |
⑦ Auto Track1 |
|
The moving ranges in the Pan/Tilt directions can be limited.
Position :
Selecting the Position menu brings up the following screen if it is for the Pan Limit setting. Move the joystick left and right to select a movement range from the starting point to the end.
Start Limit | End Limit |
⇨
Enter: Set ESC: Exit | Enter: Set ESC: Exit |
The following picture shows the Tilt Limit setting.
Move the joystick left and right to select a movement range from the starting point to the end.
| ➡ |
Auto Run |
|
|
|
|
|
Mode | OFF |
Time | 30 SEC |
⑧ Auto Track2 |
➡
Pan/Tilt Limit
①Pan Limit
② Tilt Limit
➡
Pan/Tilt Limit
①Position
② ON/OFF | OFF |
Start Limit | End Limit |
⇨
Enter: Set ESC: Exit | Enter: Set ESC: Exit |
On/Off :
Cancels or activates the Pan/Tilt Limit functions.
SPEED DOME CAMERA 58 User’s Manual | SPEED DOME CAMERA 59 User’s Manual |
