Functional Description
Functional Description
10. Preset
10.1 Preset Location Saving |
10.2Preset Edit
▶ Main Menu/Sequence Setting/Preset/Edit
▶ Main Menu/Sequence |
Main Menu
①Camera Setting
② Sequence Setting
③ P/T Setting
④ OSD Setting
⑤ Alarm Setting
⑥ Initialize Status
Setting/Preset/Setting
This function enables the memorization of a selected location and activates the Pan,Tilt, and Zoom functions at that location. Saved locations can be recalled using the Preset Execute command.
Setting Up Preset Numbers :
Selecting the Preset Setting menu brings up a screen as shown below. Move the joystick in all four directions to select the desired number.
Main Menu
①Camera Setting
② Sequence Setting
....
➡
Sequence Setting
① Preset |
② Swing SEQ |
③ Group SEQ |
.... |
You can edit the 13 preset items such as Pan/Tilt location, Zoom and Focus, which are selected among camera functions.
PTZ :
Recalls saved locations using the Preset Settings command.
Focus Mode :
Refer to the section entitled Setting Up Your Camera.
Brightness :
Refer to the section entitled Setting Up Your Camera.
Iris :
➡
Sequence Setting
Preset Setting
Preset = 001 (255)
➡
Preset
Refer to the section entitled Setting Up Your Camera.
Backlight :
Refer to the section entitled Setting Up Your Camera.
①Preset
② Swing SEQ
③ Group SEQ
④ Tour SEQ
⑤ PTZ Trace
⑥ Auto Run
Power On | Resume | ON |
MD Dwell | Time | OFF |
➡
Preset
Setting
Edit
Execute
Clear
Status
Saving Preset Locations :
Selecting a preset number and pressing the Enter key redirects the menu to the screen shown below.
Using the joystick, adjust the location of the Pan and Tilt functions and then set the Zoom and Focus command. In Preset Settings, the Zoom and Focus command is controllable only by the Zoom command.To switch between Zoom and Focus, use the Preset 1 and 2 commands as shown below.
Preset Setting Z>Z00M
1+PST:ZOOM 2+PST:FOCUS
Use W/T Preset
Setting
Edit
③ Home Position | OFF |
Execute |
|
Clear |
|
Status |
|
➡
Preset Edit
Preset = 001* (1~255)
➡
Preset Edit | [001] |
|
|
PTZ | 271/045/1X |
Focus Mode | ONE SHOT AF |
Brightness 050
Iris | AUTO |
⑤Back Light
Day & Night B/W
After Act. OFF
⑧ Scene Adj.
Day & Night :
Refer to the section entitled Setting Up Your Camera.
After Act :
Enables setting up an automatic action after the camera arrives at a selected preset location.
-TRACK : Commands the camera to perform the Auto
Tracking function.
-MD : Commands the camera to perform the Motion
Detection function.
-None : Select this when no action is desired.
Scene Adj :
Enables setting the Shutter,AGC, SSNR,
SPEED DOME CAMERA 50 User’s Manual | SPEED DOME CAMERA 51 User’s Manual |
