Functional Description
Auto Release :
Enables setting a maximum duration to follow an object.When the duration expires, the camera stops following the object and returns to the start position to follow another objects.
Functional Description
23.Auto Track 2 (SPD-3750T Only)
▶Main Menu/P/T Setting/Auto Track2
Auto Return :
-Off : Commands the camera to stay on a last spot instead of returning to the initial position.
-Time Setting : Sets a duration for the camera to standby upon the Auto Release expiration and then return to the start position.
Lost Mode :
Sets up an action for the camera in case the object it is following goes out of the detection range.
-Stop : Commands the camera to stop and abort tracking at the spot where its object disappeared.
-Research : Commands the camera to stop and standby at the spot where its object disappeared.
-
Main Menu
①Camera Setting
② Sequence Setting
③ P/T Setting
④ OSD Setting
⑤ Alarm Setting
⑥ Initialize Status
➡
P/T Setting
①Pan/Tilt Limit
② Area Setting
③ Area Masking
Prop. P/T | ON |
Digital Flip | ON |
Image Hold | OFF |
⑦ Auto Track1 |
|
|
|
⑧ Auto Track2 |
|
➡
Auto Track 2
①Zone Setting
Indicator | OFF |
Target Lock | OFF |
This function is available only with the
Auto Track 2 provides Auto Track related settings other than the ones programmed in the Auto Track 1 menu.
Zone Setting :
-Position : Enables designating certain areas as zones for the Auto Track operation.The setting procedures are the same as for Area Mask.
-Mode :Two modes are available: Mask and Alarm. When
Mask is selected, the camera does not follow the object entering the masked zone. This is useful if the camera catches swaying objects such as tree branches and flags during the Auto Track peration. When Alarm is selected, the camera activates an alarm if an object enters the zone.
-On/Off :Activates or deactivates the Zone function.
Track Zone |
| Zone 1 |
|
① Zone 1 |
| ① Position |
|
② Zone 2 |
| ② Mode | MASK |
③ Zone 3 | ⇨ | ③ ON/OFF | OFF |
④ Zone 4 |
|
| |
⑤ Zone 5 |
|
|
|
⑥ Zone 6 |
|
|
|
⑦ Zone 7 |
|
|
|
⑧ Zone 8 |
|
|
|
Indicator :
Indicates objects with icons on the screen.
-Off : Disables the Indicator function.
-On : Indicates both the pointer and target.
-Pointer : Indicates the indicator when following an object using the joystick; shows as a cross in the center of the screen.
SPEED DOME CAMERA 66 User’s Manual | SPEED DOME CAMERA 67 User’s Manual |
