Functional Description
Operating Your Camera
Initialize
26.Initialization Menu
▶ Main Menu/Initialize
Main Menu
①Camera Setting
② Sequence Setting
③ P/T Setting
④ OSD Setting
⑤ Alarm Setting
⑥ Initialize Status
➡
Initialize
①Power On Reset
② Factory Default
③ Camera Default
Auto Refresh | OFF |
⑤Auto Track Default
Power On Reset :
Restarts the camera.
Factory Default :
Enables resetting the camera to its factory default settings. When the mode is selected, all custom data such as preset locations is deleted from the camera.
Use this function if it is necessary to reset the settings of the camera.
Camera Default :
This mode can be used if the camera module has been replaced and you want to keep the camera's existing settings for the new module.
To do reset the camera, first replace the old module with a new camera module.When the replacement is properly installed, turn on the module, then execute this command.
Auto Refresh :
Enables optimizing the status of the camera’s
This mode can be used to maintain and repair the current settings of the camera when anomalous operations occur: e.g.The camera happened to directly face a light source, or the settings have been canceled after the camera repeatedly rotated in all four directions for a long time to monitor a specific location.
The default setting is Off.
-Off, 1~7 Days: Selecting Off disables Auto Refresh and but automatically executes it after 1~7 Days days has passed. action once the refresh is complete.
✽Auto Refresh takes approximately 10 seconds to finish. If Auto Refresh activates in the middle of a sequence action, the camera pauses the sequence action and performs an Auto Refresh, then resumes the sequence action once the refresh is complete.
Auto Track Default :
Enables resetting the Auto Track settings.
SPEED DOME CAMERA 74 User’s Manual | SPEED DOME CAMERA 75 User’s Manual |
