Preparing Adapter and Cables | Samsung SPD-3750T, SPD-3350 guide

Installing Your Camera

Preparing Adapter and Cables

–Power Adapter

Power adapter has the capacity of AC24V 2.5A.

–Video Cable

A BNC coaxial cable shown in the picture is required to connect Speed Dome’s video output terminal to the monitor.

Distance	Recommended Cable Specification
500m or shorter	5C2V Coaxial Cable
500m or longer	7C2V Coaxial Cable

–Communications Cable

For the camera to communicate with the controller, a RS-485/422 communications line is required. To ensure the quality of long distance communications and the accuracy of the overall communications, using a twisted pair cable such as UTP Cable is recommended.

*Caution!

Depending on the camera’s environment, the communications distance may vary.

Notes

• Neither the video nor communications cable is enclosed with the camera.

Installing Your Camera

Preparing and Installing Camera Bracket

For the installation guidelines for the brackets and housings, refer to the user’s manual enclosed with the bracket or housing that is sold separately.

•Camera Wiring Diagram 1

SPEED DOME CAMERA 26 User’s Manual

SPEED DOME CAMERA 27 User’s Manual

Image 14

Samsung SPD-3750T, SPD-3350 Preparing Adapter and Cables, Preparing and Installing Camera Bracket, Communications Cable

Contents

SPD-3750T/3750/3350 Page Contents Features 37x/33x Optical Zoom Abnormal heat is detected Do not install on your ownDo not handle the power plug With wet hands Insert foreign subjects Detailed Warnings and Cautions It to physical shock Components and Accessories Component Names and Functions Speed Dome Camara and Appliances Wiring Diagram Installing Your CameraCamera Wiring Interface Board Sold Separately RX+ Communication Protocol DIP Switch Settings SW2 Memo Camera Backup Settings Camera ID DIP Switch Settings SW1 Termination Settings To set up camera IDs, refer to the Camera ID Chart next Camera ID Chart 137 200 Preparing Adapter and Cables Preparing and Installing Camera BracketCamera Wiring Diagram Communications Cable Wiring Terminal Cables On-Ceiling Mount Type Installation ExampleAttaching Template and Installing STB-370PC Setting Up Camera DIP Switches Connecting Camera Safety Cable and Attaching Camera Interface Symbols Operating Your Camera OSD Menu Chart ATW Functional Description Camera Setting Focus and Zoom SettingsFocus Mode Digital Zoom Speed White BalanceMode Backlight Back Light ModeExposure Iris Level WDRLimit HLC Four-direction Joystick Controls User Area Setting Main Menu/Camera Setting/Back Light/UserAGC Zoom Control Modes Ssnr Samsung Super Noise ReductionDay & Night Duration Others Sequence SettingPower On Resume and MD Dwell Time Preset Clear Home PositionExecute ON/OFF Swing SEQ Group SEQ PTZ Trace SettingsTour SEQ Replay Pan/Tilt Limit SettingAuto Run Area Name Area SettingArea Masking ON/OFF OFF Digital Flip Main Menu/P/T Setting/Prop. P&TProp. P/T ⑦ Auto Track1 ⑧ Auto Track2 Image Holding Auto Track 1 SPD-3750T Only Auto Track 2 SPD-3750T Only OSD Setting MOD Alarm SettingAlarm Enable Priority Setting 1,2 Timer Functional Description Operating Your Camera Initialize Initialization Menu Operating Your Camera Product Specification Status Position Manufacturers Name Manufacturers AddressSignature Full Name Place Sales Network