Installing Your Camera
3.Setting Up Camera DIP Switches
DIP switches for communication and ID protocols are located on the bottom of the camera. For the switch settings, refer to the dip switch settings of this manual.
ID(SW1)
Protocol(SW2)
5.Connecting Camera Safety Cable and Attaching Camera
Carefully attach the camera to the mount following the alignment guide marks as shown in the picture. First hook the camera's safety cable on the mount, and then attach the camera.
| Alignment |
Safety | Direction |
Guides | |
Cable |
|
Alignment
Direction
Guides
Alignment
Directions
✽To attach the camera to the mount, refer to the alignment guide marks as shown in the picture.
Notes
• Make sure to first hook the camera's safety cable to the mount before proceeding. Otherwise you may be exposed to serious injury caused by a fallen camera.
Installing Your Camera
✽To attach or detach the camera, refer to the picture.
* Attaching the camera: Hold up the camera and push it to the mount as shown in the picture. Push the camera until you hear a “click”.
*Detaching the camera: To detach the camera, pull the camera downward while pushing the unlock buttons on the camera upward.
Unlock Button
UNLOCK
To attach the | To detach the |
camera | camera |
SPEED DOME CAMERA 30 User’s Manual | SPEED DOME CAMERA 31 User’s Manual |
