Warnings & Cautions
Cautions
Do not install under extreme |
| Do not install under unstable | ||||||
temperature conditions. |
| lighting conditions. | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Use only under temperature conditions between | Severe lighting changes or flickering may hinder normal | |||
and +50ºC to prevent low graphics quality and product | camera operation. | |||
malfunctions. When using in high temperature conditions, |
|
|
| |
provide good ventilation. |
|
|
| |
|
|
|
| |
Do not drop the camera or subject |
|
| Never keep the camera face to direct |
|
it to physical shock. |
|
| sunlight or any other strong lights. |
|
|
|
|
|
|
May cause product malfunctions. | May cause critical damage to the CCD. | |
|
|
|
Avoid touching the camera lens. |
| Do not install in a place that may be |
| exposed to rain, water, or radioactivity. | |
|
| |
|
|
|
The lens is the most important component of the camera. | Water leakage into the camera may cause damage. |
Be careful not to smear it with fingerprints. |
|
Warnings & Cautions
Detailed Warnings and Cautions
-Avoid operating the camera for long durations under high temperatures and in high humidity. Excessive heat can shorten the lifespan of the camera components.
-Do not install or place the camera near any heat sources.
-Subjecting the dome cover to physical shock may damage the camera and cause water leakage into it.
-Do not place the camera facing direct sunlight or other intense light sources. Strong lights such as spotlights can cause
-Do not drop the camera or subject it to physical shock or vibration; this can cause serious damage to the camera.
-When installing the camera near a power line, make sure to keep at least 1 meter distance from the power line, or earth an additional metal pipe to separate the camera from the power source.
-This camera is to install on the ceiling. Installing it on the ground or a unleveled location may cause product malfunctions and shorten its lifespan.
-This camera is provided with separate indoor and outdoor housings. When installing it in an outdoor environment, use the outdoor housing.
-Avoid installing and operating the camera in the following places.
∙Places whose temperature exceed the camera’s recommended range. (Indoor:
50℃, Outdoor: Refer to the housing manual)
∙Places where drastic temperature changes occur: e.g. Near an air conditioner.
∙Places that are exposed to steam, oil, and inflammable substances: e.g. Inside a kitchen.
∙Places that are exposed to radioactivity,
∙Places that are exposed to outdoor air contaminants: e.g. Dust and car exhaust.
∙Places in high humidity.
∙Places that are exposed to corrosive gas: e.g. Next to the sea.
-Smeared and dusty dome covers decrease the picture and video quality. Clean the dome cover and camera lens on a regular basis.
-Remove the plastic wrap on the dome cover only after the camera installation is complete.
-This camera is not equipped with a power switch. Plug in the camera only after the installation is complete.
SPEED DOME CAMERA 10 User’s Manual | SPEED DOME CAMERA 11 User’s Manual |
