Ice and water dispenser and drainage grid (model with ice and water dispenser )
• Use a damp cloth to clean the ice and water dispenser. Then wipe it with a dry cloth.
• Keep the ice and water dispenser and drainage grid dry.
Extra refrigerating compartment (model with Home Bar)
• Use a damp cloth to clean the extra refrigerating compartment. Then wipe it with a dry cloth.
Rubber door seals
• If the rubber door seals are dirty, the door will not close properly and the refrigerator and freezer will be unable to function efficiently. Clean them with a mild detergent and damp cloth. Then wipe them with a dry cloth.
| • When cleaning the appliance or if you are not going to use it for a long time, remove the power plug, leave |
NOTE | the doors open and keep the appliance dry. |
• Do not clean it by spraying it directly with water. | |
| • Do not clean it with benzene, thinner or car detergent. |
CHANGING THE INTERIOR LIGHT
Before changing the interior light, unplug the appliance from the power supply. If you experience difficulty when changing the light, contact your service centre.
WARNING
INTERIOR LIGHT IN THE FREEZER (BASIC MODEL ONLY) / REFRIGERATOR
1 | Place a flat screwdriver under | 2 | Pull the cover in the direction | 3 | After changing the bulb, |
| the light cover hooks and push |
| of the arrow. |
| replace the light cover. |
in the direction of the arrow.
INTERIOR LIGHT IN THE FREEZER (MODEL WITH ICE AND WATER DISPENSER)
1
2
3
4
Lift and pull out the ice maker cover (➀). | ➀ |
Use a screwdriver to remove the light cover (➁). |
|
Replace the bulb with a new one (➂), and then secure |
|
the light cover back into place using a screwdriver. |
|
Replace the ice maker cover. |
|
➂
➁ 
14
