
Use a screwdriver to
1 remove the screw as shown in the picture.
2 Remove the Lamp cover.
Use a screwdriver to
3 remove the screws securing the Lamp. There are 2 screws: one on the left and one on the right. When the screws have been completely unfastened, they will still be connected to the body of the Lamp.
Separate the Lamp from
4 the engine by holding the handle and pulling it out.
To reinstall the Lamp, fol-
5 low these steps in reverse order.
NOTE
• Be sure the replacement Lamp is the same model.
11