Samsung ST50L2HD, ST61L2HD Viewing an External Signal Source, Selecting the Signal Source

Viewing an External Signal Source

Selecting the Signal Source

Use the remote control to switch between viewing signals from connected equipment, such as VCRs, DVD, Set-Top box and the TV source (broadcast or cable).

Make sure that the remote

1 control is controlling the TV set. Press the MODE button and make sure that the “TV” LED is illuminated.

Press TV/VIDEO on the

2 remote control, and the fol- lowing on-screen menu will appear.

Move the joystick up or down

3 to select a particular signal source, and then press the joystick to activate it.

When you connect equipment to the TV, you can choose between the following sets of jacks: Video 1, Video 2, S-video 1, S-video 2, Component 1, Component 2, Component 3, DVI or PC on the TV’s rear panel, and Video 3 or S-Video 3 on the TV’s side panel.

Remote Control VCR/DVD Buttons

Flip the cover of the remote control up to access buttons that can control the tape functions of a connected VCR or DVD, including Rewind, Play, Fast Forward, Stop and Pause.

Flip the cover of your remote con-

1 trol unit for access to the tape func- tion controls. Press the appropriate buttons to control your VCR or DVD.

45